D-Link xStack DGS-3420 Series Reference Manual page 176

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Destination IPv4
Address
Destination IPv6
Address
Click the <<Back button to return to the previous window.
Click the Apply button to accept the changes made for each individual section.
and destination must be consistent, otherwise, the GRE tunnel will not work.
Click the radio button and enter the destination IPv4 address of the GRE tunnel
interface. It is used as the destination address for packets in the tunnel. The address
type that will be used depends on the Delivery Protocol. The address type used at
both the source and destination must be consistent, otherwise, the GRE tunnel will
not work.
Click the radio button and enter the destination IPv6 address of the GRE tunnel
interface. It is used as the destination address for packets in the tunnel. The address
type that will be used depends on the Delivery Protocol. The address type used at
both the source and destination must be consistent, otherwise, the GRE tunnel will
not work.
166