Changing bulbs
2
38
Turn indicators
Switch off the ignition before
changing a bulb.
Avoid touching the glass of new
bulbs with your fingers. Use a
clean, dry cloth to hold the
bulbs when inserting them.
1
3
2
• Place the motorcycle on its
main stand [Dakar: side stand]
– Make sure the ground is
level and firm.
• Remove securing screw 1
• Remove turn indicator glass 3
• Press bulb 2 back, turn it
counter-clockwise to disen-
gage it and remove
• Installation is the reverse of
the removal procedure
– Bulbs for front/rear turn indi-
cators:
12 V 10 W