Table of Contents
Advertisement
The display will indicate:
for hour and minutes
for the day of the week
(1=Mon, ..., 7=Sun)
for day and month
for the year
for the format
Fig. 2.6
To exit programming, hold down key 19 for 5
seconds (all changes will be saved) or wait 60
seconds.
NOTE: If a remote is connected, the card ac-
quires the time, date and year data from the
remote itself, and synchronises with it (ID 20).
C.h. / D.h.w. functioning
• Press the key 14 for 2 seconds until both
and
symbols appear on the dis-
play Fig. 2.7.
11
12
13
14 15
Fig. 2.7
The LCD display displays the boiler tempera-
ture (primary circuit) and the
symbols; the
symbol slowly flashes Fig.
2.8.
- 16 -
INSTRUCTIONS FOR USE
19
18
17
16
and
;
Fig. 2.8
Hot water production functioning only
• Press the key 14 for 2 seconds until the
symbol appears on the display Fig. 2.9.
11
12
13
14 15
Fig. 2.9
The LCD display displays the boiler tempera-
ture (primary circuit) and the
symbol slowly flashes Fig. 2.10.
Fig. 2.10
2.4
C.h. circuit temperature
The output temperature of c.h. water can be
adjusted by acting on keys 17 (reduce) and 18
(increase) (Fig. 2.9) from a minimum of about
25°C to a maximum of about 85°C. Press one
of the two keys once to display the "set" value.
Press again to access the modification.
19
18
17
16
symbol; the
Advertisement
Table of Contents
