Table of Contents
Advertisement
display corresponds to 2,5 seconds). Ex.
17=42 seconds.
• The writing P11 - SEt alternates on the dis-
play (Fig. 7.31).
Fig. 7.31
• By pressing key 14 (Fig. 7.28) confirmation
of the inserted value is obtained.
• Press keys 17 or 18 (Fig. 7.28) to exit with-
out changing the value.
• Exiting the "programming mode" is auto-
matic, after 15 minutes, or by cutting power.
Programming using the REMOTE control
• Press button
for more than 3 seconds to
enter in
mode (Fig. 7.32).
0
21
3
1
8
6
9
1 5
1
2
Fig. 7.32
and
• Press buttons
time to enter transparent programming (Fig.
7.33).
COMMISSIONING
Fig. 7.33
• Press buttons
"PM11" program of the pump post-circula-
tion (Fig. 7.34).
Fig. 7.34
• To modify the programmed SET, act on
buttons
grammed number to flash (Fig. 7.35). Each
step increased or decreased corresponds to
1 second.
at the same
Fig. 7.35
• To exit programming, press button .
or
to display the
or
and wait for the pro-
- 71 -
Advertisement
Table of Contents
