Table of Contents
Advertisement
Fig. 2.17
Once the scheduling is set to 00:00, confirm
with key 14 and the related automatic off time
bracket will be set to 00:00 (Fig. 2.18).
Press key 19 briefly to save the values en-
tered and the display will indicate OK to con-
firm (Fig. 2.18).
Fig. 2.18
To exit programming, hold down key 19 for 5
seconds (all changes will be saved) or wait 60
seconds.
N.B.: If you re-enter programming mode to
modify the values, the new brackets overwrite
the previous ones if necessary, wherever they
have already been programmed, or they over-
write them fully or partly.
To reset all the time brackets, please refer to
paragraph 1.3 to page 9.
INSTRUCTIONS FOR USE
Timed manual heating function
When using this function, it is possible to tem-
porarily exclude the automatic programme
without modifying it (see "Setting the heating
time brackets for zone 1 (room/TA zone)" a
pag. 17) and to activate/disable the heating
function. The programming steps can be set
within the range of 1 to 23 hours (each hour)
and subsequently from 1 to 30 days (each
day).
Activation:
Enter the "timed manual heating function pro-
gramming menu" by pressing keys 17 and 18
(Fig. 2.19) at the same time for 2 seconds until
the symbols shown in Fig. 2.20 appear on the
LCD display.
11
12
13
14 15
Fig. 2.19
Fig. 2.20
19
18
17
16
- 19 -
Advertisement
Table of Contents
