C.h. Circuit Temperature - Biasi Inovia 16S User Manual

tered and the display will indicate OK to
confirm (Fig. 2.5).
Fig. 2.5
The display will indicate:
for hour and minutes
for the day of the week
(1=Mon, ..., 7=Sun)
for day and month
for the year
for the format
Fig. 2.6
To exit programming, hold down key 17 for
5 seconds (all changes will be saved) or
wait 60 seconds.
NOTE: If a remote is connected, the card
acquires the time, date and year data from
the remote itself, and synchronises with it
(ID 20).
C.h. functioning
• Press the key 12 for 2 seconds until both
symbol appear on the display Fig.
2.7.
- 16 -
INSTRUCTIONS FOR USE
9
10
11
12 13
Fig. 2.7
The LCD display displays the boiler temper-
ature (primary circuit) and
symbol slowly flashes Fig. 2.8.
the
Fig. 2.8
2.4

C.h. circuit temperature

The output temperature of c.h. water can be
adjusted by acting on keys 15 (reduce) and
16 (increase) (Fig. 2.7) from a minimum of
about 25°C to a maximum of about 85°C.
Press one of the two keys once to display
the "set" value. Press again to access the
modification.
Signal given by the LCD display:
• The heating hot water flow "set" temper-
ature and the symbol
background of the display is illuminated
(Fig. 2.9).
17
16
15
14
symbols;
flash. The