Heating Circuit Temperature - Biasi RINNOVA CV Series User Manual And Installation Instructions

and the symbol (Figure 2.5).
Figure 2.5

2.3 Heating circuit temperature

The heating delivery hot water temperature
can be adjusted using the 14 (decrease)
and 15 (increase) buttons (Figure 2.3) from
a minimum of approx. 28°C to a maximum
of approx. 55°C or from a minimum of ap-
prox. 50°C to a maximum of approx. 80°C
(see "Selecting the heating temperature
set" on page 44). The first time one of
these two buttons is pressed the "set" value
is displayed; the second time it is pressed
this can be changed.
Signal on the LCD display:
• the "set" value of the heating delivery hot
water temperature and the
flash. The display background lights up
(Figure 2.6).
Figure 2.6
Adjusting the heating temperature based
on the outdoor temperature (without ex-
ternal sensor)
Adjust the heating delivery hot water tem-
perature as follows:
• from 27 to 35 with an outdoor temperature
of between 5°C and 15°C
• from 35 to 60 with an outdoor temperature
of between -5°C and +5°C
- 10 -
USER INSTRUCTIONS
RESET
bar
symbol
RESET
bar
• from 60 to 80 with an outdoor temperature
of below -5°C.
Your qualified installer may suggest more
suitable settings for your system.
The set temperature has been reached
when the symbol is not visible on the
LCD display.
Heating power demand
When the boiler receives a heating power
request, the display shows the
followed by an increase in the heating de-
livery water temperature. The
flashes (Figure 2.7).
Figure 2.7
Adjusting the heating temperature with
an external sensor installed
When the optional external sensor is in-
stalled, your boiler will automatically adjust
the heating system's delivery water tem-
perature according to the outdoor tempera-
ture.
In this case, the boiler must be set by a
qualified installer (see "Enabling operation
with the external sensor and setting the K
coefficient" on page 41).
If the room temperature is not comfortable,
you can increase or decrease the heating
system delivery temperature by ± 15°C us-
ing the 14 (decrease) and 15 (increase) but-
tons (Figure 2.3).
symbol
symbol
RESET
bar