Configuring The Appletalk Settings - Konica Minolta bizhub C652 User Manual

5.1 Mac OS X 10.2/10.3/10.4/10.5/10.6

Configuring the AppleTalk settings

Configuring the AppleTalk settings for the machine
Enable AppleTalk in "AppleTalk Setting", and then enter the printer name.
Reference
- AppleTalk connection supports Mac OS X 10.2/10.3/10.4/10.5 only.
d
Reference
For details on the AppleTalk settings for the machine, refer to the "User's Guide [Network Administrator]".
Configuring the AppleTalk settings for the computer
Configure the AppleTalk settings for the Macintosh computer connected to the printer.
1
In the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
The Ethernet setting window appears.
% For OS X 10.5, select "Ethernet", and then click [Advanced].
% For OS X 10.4, select "Built-in Ethernet", and then click [Configure].
4
Double-click the "AppleTalk" tab to enable AppleTalk.
5
Click the close button at the top left corner of the window.
% When the "This service has unsaved changes" message appears, click [Apply].
Adding a printer
1
In the "Apple" menu, select "System Preferences".
2
Click the [Print & Fax] icon.
3
Click [+] on the "Print & Fax" window.
4
Click [Default].
Connected printers are detected.
% If no printer is detected, turn your printer off then on again.
In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again.
If you turn the printer on immediately after turning it off, it may not function correctly.
5
From the "Printer Name" list, select the desired AppleTalk-connected model name.
The printer driver corresponding to the selected printer name is automatically selected.
% To check the printer name, select [Network Settings] - [Bonjour Setting] in [Administrator Settings]
of this machine. In the default setting, the contents enclosed in parentheses ( ) suffixed in [Bonjour
Name] correspond to the low-order three bytes of the MAC address.
% After the printer driver is selected, go to Step 7.
% If an incorrect printer driver is selected, go to Step 6.
6
Select the desired printer driver manually.
% When OS X 10.5 is used, select the "Select a driver to use" from the "Print Using", and then select
the printer driver of the desired model name from the list.
% When OS X 10.4 is used, select "KONICA MINOLTA" from the "Print Using", and then select the
printer driver of the desired model name from the list.
7
Click [Add].
When the selected printer is registered in the "Print & Fax", the setting procedure is completed.
% If the "Installable Options" window appears, proceed to change the option settings as necessary.
For details, refer to page 9-5.
bizhub C652/C652DS/C552/C452 (Version 2)
5
5-5