Page 1 User’s Guide Copy Operations...
Page 3: Table Of Contents
Original and paper sizes ........................1-6 Original and paper indications ......................1-6 Part names and their functions Options............................. 2-3 2.1.1 bizhub C652/C652DS/C552 ......................2-3 2.1.2 bizhub C452............................2-6 Main Body ............................2-8 2.2.1 Outside of the main body (front) ......................2-8 2.2.2...
Page 4 Color Adjustment ..........................5-33 5.4.3 Book Copy/Repeat .......................... 5-35 Book Copy ............................5-35 Image Repeat........................... 5-36 Poster Mode ............................ 5-37 Booklet Original..........................5-39 5.4.4 Page Margin............................. 5-40 5.4.5 Image Adjust ............................ 5-42 5.4.6 Booklet............................. 5-43 Contents-2 bizhub C652/C652DS/C552/C452 (Version 2)
Page 5 Vertical Punch (Z-Fold) Position Adjustment ................... 7-20 Horizontal Punch (Z-Fold) Position Adjustment................7-20 1st Z-Fold Position Adjustment ....................... 7-21 2nd Z-Fold Position Adjustment ...................... 7-21 Punch Unit Size Detect Sensor......................7-22 Color Registration Adjust ......................... 7-23 Gradation Adjustment ........................7-24 bizhub C652/C652DS/C552/C452 (Version 2) Contents-3...
Page 6 Loading paper............................ 8-4 Loading paper into trays 1 and 2 ....................... 8-4 Loading paper into trays 3 and 4 ....................... 8-5 Loading paper into the bypass tray ....................8-6 Loading paper into the LCT ....................... 8-8 Contents-4 bizhub C652/C652DS/C552/C452 (Version 2)
Page 7 Viewing counters..........................8-12 Checking the total number of pages printed ................... 8-14 Cleaning procedure ........................8-15 Slit glass (bizhub C652/C552/C452) ....................8-15 Slit glass (front) (bizhub C652DS) ....................8-15 Slit glass (back) (bizhub C652DS) ....................8-16 Original glass, control panel, paper take-up roller................8-17 Housing, document pad ........................
Page 8 Paper types and paper capacities ....................12-3 12.2 Machine specifications......................... 12-5 bizhub C652/C652DS/C552/C452....................12-5 Automatic duplex unit ........................12-8 Reverse automatic document feeder (bizhub C652/C552/C452)............ 12-8 Reverse automatic document feeder (bizhub C652DS)..............12-8 12.3 Options............................12-9 Large capacity unit LU-301......................12-9 Large capacity unit LU-204......................
Page 9: Introduction
Introduction...
Page 11: Welcome
This manual describes details on the fax driver func- tion that transmits faxes directly from a computer. • PC-FAX Network Administrator This manual describes details on setting methods for each function using the network connection. • Network settings • Settings using PageScope Web Connection bizhub C652/C652DS/C552/C452 (Version 2)
Page 12: User's Guide
Note that basic technical knowledge about the product is required to enable users to perform maintenance work or troubleshooting operations. Limit your maintenance and troubleshooting operations to the areas explained in this manual. Should you experience any problems, please contact your service representative. bizhub C652/C652DS/C552/C452 (Version 2)
Page 13: Conventions Used In This Manual
% This symbol indicates a supplementary explanation of a procedural instruction. A procedural operation is illustrated. This symbol indicates transition of the control panel to access a desired menu item. This symbol indicates a desired page. bizhub C652/C652DS/C552/C452 (Version 2)
Page 14: Key Symbols
X side the length. Original and paper indications w indicates the paper size with the length (X) being longer than the width (Y). v indicates the paper size with the length (X) being shorter than the width (Y). bizhub C652/C652DS/C552/C452 (Version 2)
Page 15: Part Names And Their Functions
Part names and their functions...
Page 17: Options
Working table WT-506 is required to install the authen- Authentication unit (biometric type) tication unit. AU-102 Authentication unit (IC card type) Performs user authentication by scanning information AU-201 recorded on the IC card. Working table WT-506 is required to install the authen- tication unit. bizhub C652/C652DS/C552/C452 (Version 2)
Page 18 Install this kit when using the connection function with a Bluetooth-compatible cellular phone or PDA. This kit contains a speaker and a receiving device for Blue- tooth communication. For details on compact keyboards, contact your serv- ice representative. bizhub C652/C652DS/C552/C452 (Version 2)
Page 19 Required when using Web browser, image panel, PDF processing, searchable PDF, My panel, or My address function. If necessary, you can increase up to nine lan- guages, which can be displayed in the control panel of this machine. bizhub C652/C652DS/C552/C452 (Version 2)
Page 20: Bizhub C452
Allows you to use this machine as a network-enabled color printer. Large capacity unit LU-301 Can be loaded with up to 3,000 sheets of A4 -size pa- per. Referred to as the LCT throughout the manual. bizhub C652/C652DS/C552/C452 (Version 2)
Page 21 Heater HT-508 Install this unit into the tray to dehumidify the paper. Dehumidifying prevents paper in the tray from absorb- ing moisture. • This option may not be available depending on the sales area. bizhub C652/C652DS/C552/C452 (Version 2)
Page 22: Main Body
Left-side cover release lever Left-side cover Lateral guide Original tray Original output tray Sub power switch USB port (type A) USB 2.0/1.1 USB port (type A) USB 2.0/1.1 (For compact keyboard) Automatic duplex unit release lever Automatic duplex unit bizhub C652/C652DS/C552/C452 (Version 2)
Page 23 Bypass tray door release lever Lower right-side door Lower right-side door release lever Paper-empty indicator Total counter Main power switch Tray 4 Tray 3 Tray 2 Tray 1 Lower front door Upper front door Output tray Status indicator bizhub C652/C652DS/C552/C452 (Version 2)
Page 24: Outside Of The Main Body (Rear)
Main Body 2.2.2 Outside of the main body (rear) The illustration above shows the main unit with an optional video interface kit, fax kit, and mount kit. 2-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 25 Telephone jack 2 (LINE PORT2) Jack for connecting a telephone (TEL PORT1) Telephone jack 1 (LINE PORT1) USB port (type A) USB 2.0/1.1 RS-232C port USB port (type B) USB 2.0/1.1 Network connector (10Base-T/100Base-TX/1000Base-T) Ozone filter bizhub C652/C652DS/C552/C452 (Version 2) 2-11...
Page 26: Main Body Inside
Main Body 2.2.3 Main body Inside bizhub C652/C552/C452 2-12 bizhub C652/C652DS/C552/C452 (Version 2)
Page 27 Original glass Fusing unit Fusing unit cover lever Print head glass cleaning tool Waste toner box Imaging unit Charger-cleaning tool Imaging unit release lever Toner cartridges Slit glass Original scales Jam removal dial Slit glass cleaner bizhub C652/C652DS/C552/C452 (Version 2) 2-13...
Page 28 Main Body bizhub C652DS Name Original glass Fusing unit Fusing unit cover lever Print head glass cleaning tool 2-14 bizhub C652/C652DS/C552/C452 (Version 2)
Page 29 Main Body Name Waste toner box Imaging unit Charger-cleaning tool Imaging unit release lever Toner cartridges Slit glass (front) Original scales Opening and closing guide Slit glass cleaner Slit glass (back) bizhub C652/C652DS/C552/C452 (Version 2) 2-15...
Page 30: Control Panel
Main Body 2.2.4 Control panel Name Stylus pen Touch panel Main power indicator Sub power switch Function key Data indicator Keypad Brightness adjustment dial 2-16 bizhub C652/C652DS/C552/C452 (Version 2)
Page 31: Adjusting The Angle Of The Control Panel
You can tilt the angle of the control panel to one of the three positions. To tilt the control panel to the left or right, hold the bottom of the control panel, and then tilt the panel to the left or right. bizhub C652/C652DS/C552/C452 (Version 2) 2-17...
Page 32: Touch Panel
Do not apply excessive pressure on the touch panel. Such impact may leave a flaw on the panel, inviting damage to the touch panel. When operating in the touch panel, never press down on the touch panel with force or with a pointed object such as a mechanical pencil. Basic tab 2-18 bizhub C652/C652DS/C552/C452 (Version 2)
Page 33 Press the [Utility/Counter] key ö [User Settings] ö [Custom Display Settings] ö [Copier Settings] ö [Default Tab]. To configure color selection settings for buttons and tabs: Press the [Utility/Counter] key ö [User Settings] ö [Custom Display Settings] ö [Color Selection Settings] . bizhub C652/C652DS/C552/C452 (Version 2) 2-19...
Page 34: Option
Option Option 2.3.1 Finisher FS-526/Saddle stitcher SD-508/Punch kit PK-516 2-20 bizhub C652/C652DS/C552/C452 (Version 2)
Page 35 Guide lever [FN1] Staple replacement door Guide lever [FN13] Guide lever [FN14] Exit cover * Press the output tray switch to move folded and center stapled paper to the end of the folding output tray. bizhub C652/C652DS/C552/C452 (Version 2) 2-21...
Page 36: Job Separator Js-602
Option 2.3.2 Job separator JS-602 Name Finishing tray Job separator cover 2-22 bizhub C652/C652DS/C552/C452 (Version 2)
Page 37: Z Folding Unit Zu-606
Option 2.3.3 Z Folding Unit ZU-606 bizhub C652/C652DS/C552/C452 (Version 2) 2-23...
Page 38 Name Z folding/conveyance unit Guide lever [FN1] Punch scrap box Front door Guide lever [FN6] Guide lever [FN7] Guide lever [FN8] Recessed pull [FN2] Jam removal dial [FN5] Guide lever [FN3] Jam removal dial [FN4] 2-24 bizhub C652/C652DS/C552/C452 (Version 2)
Page 39: Post Inserter Pi-505
Option 2.3.4 Post Inserter PI-505 Name Post inserter control panel Lower tray paper guide Lower Tray Upper Tray Upper Tray paper guide Upper unit release lever bizhub C652/C652DS/C552/C452 (Version 2) 2-25...
Page 40: Finisher Fs-527/ Saddle Stitcher Sd-509/ Punch Kit Pk-517/ Job Separator Js-603
Option 2.3.5 Finisher FS-527/ Saddle Stitcher SD-509/ Punch Kit PK-517/ Job Separator JS-603 2-26 bizhub C652/C652DS/C552/C452 (Version 2)
Page 41 Option Name Output tray 2 Output tray 1 Front door Horizontal transport unit cover Stapler Guide lever [FN3] Jam removal dial [FN2] Guide lever [FN1] Guide lever [FN4] Staple holder Punch scrap box bizhub C652/C652DS/C552/C452 (Version 2) 2-27...
Page 42: Job Separator Js-504
Recessed pull [FN5] Transport unit Punch kit Job separator Staple cartridge Recessed pull [FN7] Folding output tray 2.3.6 Job Separator JS-504 Name Jam removal dial Eject assist lever Output tray 2 Tray extension Output tray 1 2-28 bizhub C652/C652DS/C552/C452 (Version 2)
Page 43: Large Capacity Unit Lu-301/Lu-204
Option 2.3.7 Large capacity unit LU-301/LU-204 Name Jam removal cover Upper door Paper take-up roller Paper-empty indicator Release lever bizhub C652/C652DS/C552/C452 (Version 2) 2-29...
Page 44 Option 2-30 bizhub C652/C652DS/C552/C452 (Version 2)
Page 45: Using This Machine
Using this machine...
Page 47: Turning On Or Off The Machine
Do not connect or disconnect the USB cable of the compact keyboard while this machine is turned on. Do not also connect another medium to the USB port for the compact keyboard. bizhub C652/C652DS/C552/C452 (Version 2)
Page 48 To turn the power off, press the [sub power switch], then the [main power switch]. Reference To change the default settings for Copy: Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Default Copy Settings]. bizhub C652/C652DS/C552/C452 (Version 2)
Page 49: Basic Copy Operations
% If the document is loaded in any orientation other than with the top of the document toward the back of the machine, be sure to select the document orientation. Slide the adjustable lateral guides against the edges of the original. bizhub C652/C652DS/C552/C452 (Version 2)
Page 50: Placing The Original On The Original Glass
% When Non-Image Area Erase is selected, the original can be placed anywhere on the original glass. Close the ADF. bizhub C652/C652DS/C552/C452 (Version 2)
Page 51: Basic Copy Operations
% If an original with a password embedded by the password copy function is scanned, the copy operation starts after you enter the password. % If multiple originals with different passwords are scanned at the same time, you will need to enter a password for each original. bizhub C652/C652DS/C552/C452 (Version 2)
Page 52: Copy Operations Using Multiple Functions
This section describes copy operations using combination of functions. Load the original. Press [Original Setting]. % For details on original setting, refer to page 5-17. Press [Basic] ö [Duplex/Combine]. % For details on the Duplex/Combine settings, refer to page 5-9. bizhub C652/C652DS/C552/C452 (Version 2)
Page 53 Press [Application] and then configure settings for respective functions. % For setting for the application functions, refer to page 5-22. Press [Basic] ö [Finishing]. % For details on copy finishing and folding/binding, refer to page page 5-11. bizhub C652/C652DS/C552/C452 (Version 2)
Page 54: Functions That Cannot Be Combined
Some settings cannot be combined with each other. If they are combined improperly, the settings will be given priorities in either of the two ways described below. The setting configured last is given priority. (The setting specified first is canceled.) The setting configured first is given priority. (A warning message appears.) 3-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 55: Control Panel Keys
Control Panel Keys...
Page 57: Control Panel And Functions
[Utility/Counter] Switches to the Utility screen or the Meter Count p. 4-7 screen. [Reset] Resets all settings (except programmed settings) p. 4-5 entered using the control panel or touch panel. bizhub C652/C652DS/C552/C452 (Version 2)
Page 58 Guide [Network Scan/Fax/Network Fax Opera- tions]". [Copy] Enters Copy mode. (As a default, the machine is in p. 4-6 Copy mode.) While the machine is copying, the indi- cator on the [Copy] key lights up in green. bizhub C652/C652DS/C552/C452 (Version 2)
Page 59: About The [Start] Key, The [Stop] Key, And The [Interrupt] Key
The copy settings return to those specified before the interrupting copying job. The [Reset] key Resets all settings (except programmed settings) entered using the control panel or touch panel. Press the [Reset] key. The basic settings screen appears. bizhub C652/C652DS/C552/C452 (Version 2)
Page 60: About The [Copy] Key, The [Fax/Scan] Key, And The [User Box] Key
For details on the fax/scan function, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]". The [User Box] key Enters User Box mode. For details on User Box functions, refer to the "User's Guide [Box Operations]". bizhub C652/C652DS/C552/C452 (Version 2)
Page 61: The [Utility/Counter] Key
Check the function version of this machine and of the printer driver. Ensure that they match before using this machine. IPv4 Address: Allows you to check the currently specified IPv4 address. IPv6 Address: Allows you to check the currently specified IPv6 address. bizhub C652/C652DS/C552/C452 (Version 2)
Page 62: The [Mode Memory] Key
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Restrict User Access] ö [Copy Program Lock Settings]. To delete a copy program: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Restrict User Access] ö [Delete Saved Copy Program]. bizhub C652/C652DS/C552/C452 (Version 2)
Page 63: The [Access] Key
The users, who belong to the suspended account, cannot also log in to this machine. If authentication is performed with PageScope Authentication Manager, check with your server administrator for information on the login procedure. Press the [Access] key. Screen for user authentication bizhub C652/C652DS/C552/C452 (Version 2)
Page 64 • After entering numbers from the keypad, press [Password] to enter alphabets and sym- bols in succession. Login Displays the basic settings screen, enabling you to use this machine. 4-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 65: Using The Machine During Non-Scheduled Hours
Using the keypad, enter the length of time to elapse before the machine enters Sleep mode again. Press [OK]. The basic settings screen appears. Reference To configure Weekly Timer: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Weekly Timer Settings]. bizhub C652/C652DS/C552/C452 (Version 2) 4-11...
Page 66: The [Power Save] Key
The machine returns from Low Power mode when any other key on the control panel or the touch panel surface is pressed. Reference To enable Low Power mode: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Power Save Settings]. 4-12 bizhub C652/C652DS/C552/C452 (Version 2)
Page 67: The [Accessibility] Key
([+]) again. • To cancel the touch panel adjustment process, press the [Stop] or [Re- set] key. • If the touch panel cannot be adjusted, contact your service represent- ative. bizhub C652/C652DS/C552/C452 (Version 2) 4-13...
Page 68 [Severe Caution Sound]: A sound produced when the door or cover is opened or when an error occurs that requires action by a service rep- resentative Default Enlarge Display For details, refer to the "User's Guide [Enlarge Display Operations]". Settings 4-14 bizhub C652/C652DS/C552/C452 (Version 2)
Page 69: The [Enlarge Display] Key
For details on the Enlarge Display screen, refer to the "User's Guide [Enlarge Display Operations]". Press the [Enlarge Display] key to return to normal display. If PageScope Authentication Manager is used for authentication, the login screen cannot be switched to the enlarged display mode. Press the [Enlarge Display] key. bizhub C652/C652DS/C552/C452 (Version 2) 4-15...
Page 70: The [Guidance] Key
Function Map Check descriptions from a navigation destination of the current screen or the menu structure it belongs to. Other Functions Check descriptions by selecting a Guidance menu grouped by useful func- tion. 4-16 bizhub C652/C652DS/C552/C452 (Version 2)
Page 71 Consumables Replace/ Check procedures for replacing the toner cartridge, imaging unit or waste Processing Procedure toner box, adding staples or discarding punch-hole scraps by viewing an- imations. Press the target button, and then press [Start Guidance]. bizhub C652/C652DS/C552/C452 (Version 2) 4-17...
Page 72: The [C] (Clear) Key
4.10 The [C] (Clear) key Clears a value (such as the number of copies, a zoom ratio and size) entered using the keypad. Press the [C] key. The value is deleted. Enter the correct value. 4-18 bizhub C652/C652DS/C552/C452 (Version 2)
Page 73: The [Proof Copy] Key
Stored job registration is performed when the System Auto Reset function is activated or one minute after (if System Auto Reset is set to "OFF"). Press the [Proof Copy] key to repeat proof copy. Press [Print]. The number of copies yet to be printed is registered as a copy job. bizhub C652/C652DS/C552/C452 (Version 2) 4-19...
Page 74: Using A Preview Image To Check The Copy Result (Advanced Preview)
% To change the settings, press [View Pages]. Go to Step 7. % To start printing, press the [Start] key. % To scan another original, press [Finish], load the original, and then press the [Start] key. Change the settings, and then press [View Status]. 4-20 bizhub C652/C652DS/C552/C452 (Version 2)
Page 75 Switch between the View Status and View Pages tab in the Preview screen. Perform image rotation and setting changes on [View Pages] and stop scanning on [View Status]. Press the [Start] key. Select this menu to start printing. bizhub C652/C652DS/C552/C452 (Version 2) 4-21...
Page 76 The [Proof Copy] key 4.11 4-22 bizhub C652/C652DS/C552/C452 (Version 2)
Page 77: Copy Function
Copy Function...
Page 79 Configure the application settings for making copies. p. 5-22 Left panel Job List Check jobs currently being performed p. 5-65 and jobs waiting to be performed. Check Job Check the current settings and the result p. 5-67 of the settings. bizhub C652/C652DS/C552/C452 (Version 2)
Page 80: Basic
This item is not displayed when two shortcut keys are configured. Shortcut Key Allows you to arrange shortcut keys for the frequently used Appli- – cation functions on the Basic screen. bizhub C652/C652DS/C552/C452 (Version 2)
Page 81: Color
(apparent color densities) and the gradation levels into density differences of the single color. Average Density Copies the original by only converting the grada- tion levels into density differences of the single color, regardless of the color differences in the original. bizhub C652/C652DS/C552/C452 (Version 2)
Page 82: Paper
Specify a paper size to use the bypass tray as a paper tray dedicated to the paper size. [Custom Size] (only for Bypass Tray): Enter the paper size. [Wide Paper]: Select a paper size larger than the original. bizhub C652/C652DS/C552/C452 (Version 2)
Page 83: Configuring A Custom Size
[Basic] ö [Paper] ö [Bypass Tray] ö [Change Tray Settings] ö [Wide Paper]. Settings Wide Paper Select the size of the paper to be loaded. Change Size Enter the length [X] and width [Y] of the paper. Preset Paper Sizes Enables 12 e 18 w to be selected. bizhub C652/C652DS/C552/C452 (Version 2)
Page 84: Zoom
User Preset Zoom Select a registered copy zoom value. To change the registered zoom val- ues, use [Set Zoom]. Reference To set image rotation: Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Enlargement Rotation]. bizhub C652/C652DS/C552/C452 (Version 2)
Page 85: Duplex/Combine
297mm, a binding margin along the short side of the paper is se- lected. • If [Auto] is selected for the original binding po- sition, the binding margin is set at the top or on the left. bizhub C652/C652DS/C552/C452 (Version 2)
Page 86 Copies images of four original pages on one sheet of paper. <Horizontal> <Vertical> 8in1 Copies images of eight original pages on one sheet of paper. <Horizontal> <Vertical> Horizontal Specify the combine order of the original (Num- bering Direction setting). Vertical 5-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 87: Finishing
"Staple" or "Punch". Press [Basic] ö [Finishing]. Settings Sort Prints the copied sets separately when a multi-page original is copied. Group Makes multiple copies of each page when you make multiple copies of a multi- page original. bizhub C652/C652DS/C552/C452 (Version 2) 5-11...
Page 88 When the Saddle Stitcher SD-509 is installed on the Finisher FS-527: Half Fold Center Staple & Fold Staple Staples copies in corner or at two points before they are output. Punch Punches holes in copies before they are output. 5-12 bizhub C652/C652DS/C552/C452 (Version 2)
Page 89: Post Inserter
Only the lower tray can be used as the output tray. The upper tray is not available. Keys on control panel Name Corner staple lamp Center staple & fold lamp [Finishing] key 2-hole lamp 3-hole lamp [Select punch] key [Start/stop] key 4-hole lamp Tri-fold lamp 2 position staple lamp bizhub C652/C652DS/C552/C452 (Version 2) 5-13...
Page 90: Finishing Using Post Inserter
[Select punch] key to turn the LED on. % Press [Finishing] key and [Select punch] key, and select the desired finishing. Press the [Start/stop] key. % If [Start/stop] key is pressed during operation, the operation will be stopped. 5-14 bizhub C652/C652DS/C552/C452 (Version 2)
Page 91: Separate Scan
After all original pages have been scanned, press [Finish]. Press the [Start] key. Reference To set the Separate Scan output method: Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Separate Scan Output Method]. bizhub C652/C652DS/C552/C452 (Version 2) 5-15...
Page 92: Auto Rotate Off
Select this setting to copy the original according to the paper orientation without rotating the image. For some paper sizes or zoom values, part of the image may be cut off. Press [Basic] ö [Auto Rotate OFF]. 5-16 bizhub C652/C652DS/C552/C452 (Version 2)
Page 93: Original Setting
Specify the original direction to load into the ADF or place on the original glass when copying 2-sided originals or making 2-sided or combined cop- ies. Despeckle Reduces the influence of a dirt of the slit glass upon a copy output when loading an original in the ADF. bizhub C652/C652DS/C552/C452 (Version 2) 5-17...
Page 94: Copying Mixed Originals
B4 w A4 w A5 v A5 w B5 v B5 w A3 w A4 v B4 w A4 w A5 v A5 w B5 v B5 w Possible to combine Not possible to combine 5-18 bizhub C652/C652DS/C552/C452 (Version 2)
Page 95: Copying Z-Folded Originals
Unfold folded originals before loading them into the ADF. If the original is copied without being unfolded, a paper jam may occur. Load the original into the ADF. In the basic settings screen, press [Original Setting]. Press [Z-Folded Original]. % To cancel the setting, press [Z-Folded Original] again to deselect it. bizhub C652/C652DS/C552/C452 (Version 2) 5-19...
Page 96: Quality/Density
Select this setting to copy originals with a back- ground color, originals containing pencil markings or fine colored lines such as maps. A sharp copy image is produced. 5-20 bizhub C652/C652DS/C552/C452 (Version 2)
Page 97 To emphasize the background image, press [Lighter Text] to adjust the set- ting toward -. [Text Enhancement] can be configured when an item other than [Photo] is selected. Glossy Makes copies with a glossy finish. bizhub C652/C652DS/C552/C452 (Version 2) 5-21...
Page 98: Application
Copies the contents of the front and back sides of a card-size orig- p. 5-62 inal, for example, insurance card, driver's license, or business card, on one sheet. Save in User Box Saves the scanned original data in a User Box. p. 5-63 5-22 bizhub C652/C652DS/C552/C452 (Version 2)
Page 99: Sheet/Cover/Chapter Insert
Settings Interleave Paper Select the paper tray loaded with paper with a transparency interleaf. Transparency Indicates the paper size of the loaded transparency. Reference Setting Black for Color Settings: Press [Basic] ö [Color] ö [Black]. bizhub C652/C652DS/C552/C452 (Version 2) 5-23...
Page 100: Cover Sheet
Select the paper tray loaded with the paper for the front/back cover page or blank cover pages. You can select the paper tray of the Post Inserter when [Front(Blank)] or [Back(Blank)] is selected while the optional Post Inserter is installed. 5-24 bizhub C652/C652DS/C552/C452 (Version 2)
Page 101: Insert Sheet
Leaves the back side of the first page of the copy blank, inserts the specified paper for the second page of the copy, and makes a 2-sided copy of the sec- ond and third pages of the original onto the inserted sheet. REPORT REPORT REPORT bizhub C652/C652DS/C552/C452 (Version 2) 5-25...
Page 102: Insert Image
If the same page number is specified twice, two insertion original pages are added at the specified location. If the specified page number is greater than the total number of pages in the main original, the corresponding insertion original page is added at the end of the copy. 5-26 bizhub C652/C652DS/C552/C452 (Version 2)
Page 103 % To insert a multi-page original, repeat steps 4 and 5 until all pages of the insertion original are scanned in the order that they are to be inserted. Press [Finish]. Press the [Start] key. Copying begins. bizhub C652/C652DS/C552/C452 (Version 2) 5-27...
Page 104: Chapters
Makes copies of the first pages of the chapters on paper of a different type from that for the text pages. None Copies all pages with the same type of paper. Reference To configure the 2-sided copy mode: Press [Basic] ö [Duplex/Combine]. 5-28 bizhub C652/C652DS/C552/C452 (Version 2)
Page 105: Program Jobs
% Press [Retry] to delete the scanned job. Press [Change Setting] to configure the copy settings. % When the original has been loaded on the original glass, press [Finish]. Load the next original and press [Change Setting]. bizhub C652/C652DS/C552/C452 (Version 2) 5-29...
Page 106 Select the desired copy settings, and then press the [Start] key. % Repeat Steps 3 to 5 until all originals have been scanned. After all original pages have been scanned, press [Finish]. Press [Yes]. Specify finish settings as needed. Press [Start] or the [Start] key. 5-30 bizhub C652/C652DS/C552/C452 (Version 2)
Page 107: Edit Color
% To cancel the Neg./Pos. Reverse function, press [Neg./Pos. Reverse] again. Reference To set Single Color: Press [Basic] ö [Color] ö [Single Color]. To Set Background Color: Press [Application] ö [Edit Color] ö [Background Color]. bizhub C652/C652DS/C552/C452 (Version 2) 5-31...
Page 108: Mirror Image
Select [Auto] to detect the size of the original automatically. If the size of the original is not automatically detected, select the original size. Custom Size Enter the original size. Photo Size Select the photo size. 5-32 bizhub C652/C652DS/C552/C452 (Version 2)
Page 109: Background Color
Press [Application] ö [Edit Color] ö [Background Color]. Settings Select Color Select a background color. Color Adjustment Adjust the image quality to fit an image based on the color-copied original. Press [Application] ö [Edit Color] ö [Color Adjust]. bizhub C652/C652DS/C552/C452 (Version 2) 5-33...
Page 110 By changing the amount of each of the four toners, adjust the tints in the copy. Configure respective functions. % Press [Sample Copy] to see how it will appear with the currently specified color quality adjustment settings. 5-34 bizhub C652/C652DS/C552/C452 (Version 2)
Page 111: Book Copy/Repeat
Front and Back Cover Copies the front cover, separate copies of each page in the page spreads and the back cover in the original page order. bizhub C652/C652DS/C552/C452 (Version 2) 5-35...
Page 112: Image Repeat
Repeats copying of the scanned area of the original so that the sheet is filled with the copied image. However, some parts of the image may be lost. Auto Detect Automatically detects the area to be scanned. 5-36 bizhub C652/C652DS/C552/C452 (Version 2)
Page 113: Poster Mode
Enter the width of the binding margin (0.1 mm - 20.0 mm). When [None] is selected, the binding margin width is set to 0 mm. Zoom Enter the zoom to output a copy of the finished size. bizhub C652/C652DS/C552/C452 (Version 2) 5-37...
Page 114 Select [Auto] to detect the size of the original automatically. If the size of the original is not automatically detected, select the original size. Custom Size Enter the original size. Photo Size Select the photo size. 5-38 bizhub C652/C652DS/C552/C452 (Version 2)
Page 115: Booklet Original
% To use the ADF, load the pages with the side that includes the first page on top. Press [Application] ö [Book Copy/Repeat] ö [Booklet Original]. Press the [Start] key. After all original pages have been scanned, press [Finish] and the [Start] key. bizhub C652/C652DS/C552/C452 (Version 2) 5-39...
Page 116: Page Margin
If the positions of the staples or punched holes are different from the binding position, the positions of the staples or punched holes are given priority. If part of the image is lost when copied with the specified binding margin settings, reduce the zoom and perform copying. Press [Application] ö [Page Margin]. 5-40 bizhub C652/C652DS/C552/C452 (Version 2)
Page 117 0 mm. Original Direction Select the orientation of the original loaded into the ADF or placed on the original glass. Reference To set the zoom: Press [Basic] ö [Zoom]. bizhub C652/C652DS/C552/C452 (Version 2) 5-41...
Page 118: Image Adjust
Select [Auto] to detect the size of the original automatically. If the size of the original is not automatically detected, select the original size. Custom Size Enter the original size. Photo Size Select the photo size. 5-42 bizhub C652/C652DS/C552/C452 (Version 2)
Page 119: Booklet
Copies the front and back cover sheets onto separate paper when copying an original with a front/back cover sheet. When the original to copy does not have a front and back cover, you can insert blank sheets of paper as the front and back covers. bizhub C652/C652DS/C552/C452 (Version 2) 5-43...
Page 120: Erase
Erases each frame side in a different width. Press [+], [-] to set the erasing width between 0.1 mm and 50.0 mm. The erasing width can also be entered using the keypad. None Sets the erasing width to 0 mm. 5-44 bizhub C652/C652DS/C552/C452 (Version 2)
Page 121: Non-Image Area Erase
The original image may be defected at its top or end. Press [Application] ö [Erase] ö [Non-Image Area Erase]. Reference To set Erase Operation: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Erase Adjustment]. bizhub C652/C652DS/C552/C452 (Version 2) 5-45...
Page 122: Stamp/Composition
Makes copies with the image of the first scanned original page overlapping the subsequent original images. Registered Overlay Saves an image of the scanned original as a registered overlay in the hard disk and later overlay the registered image on the copy of another original. 5-46 bizhub C652/C652DS/C552/C452 (Version 2)
Page 123: Date/Time
0.1 mm and 50.0 mm. Text Details Set the text color, size and type. Reference To enable printing on blank pages: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Blank Page Print Settings]. bizhub C652/C652DS/C552/C452 (Version 2) 5-47...
Page 124: Page Number
"1" on the third copied page. • The entered chapter number is printed if [1-1, 1-2...] is selected under "Page Number Type". Page Number Type Select the type (format) of the page. 5-48 bizhub C652/C652DS/C552/C452 (Version 2)
Page 125 To configure the settings for the Chapters function: Press [Application] ö [Sheet/Cover/Chapter Insert] ö [Chapters]. To enable printing on blank pages: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Blank Page Print Settings]. bizhub C652/C652DS/C552/C452 (Version 2) 5-49...
Page 126: Stamp
Adjust Position Adjust horizontal and vertical positions between 0.1 mm and 50.0 mm. Reference To enable printing on blank pages: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Blank Page Print Settings]. 5-50 bizhub C652/C652DS/C552/C452 (Version 2)
Page 127: Copy Protect
Select Yes to print the serial number of this ma- chine. For details on setting for the serial number, contact your service representative. Distribution Control Prints the distribution control number. Number Specify the distribution control number using a val- ue between 1 and 99999999. bizhub C652/C652DS/C552/C452 (Version 2) 5-51...
Page 128: Copy Guard
You can select the preset stamp, date/time, and the other items together. Multiple preset stamps cannot be selected. A Copy Guard cannot be printed on a colored paper, envelope, or transparency film. 5-52 bizhub C652/C652DS/C552/C452 (Version 2)
Page 129: Password Copy
If an attempt is made to copy password-copied sheets, the machine that supports this function scans a Password Copy pattern and prompts you to enter the password. When the correct password is entered, copying will start. bizhub C652/C652DS/C552/C452 (Version 2) 5-53...
Page 130 Specify Text/Background Color, Password Copy Pattern, Text Size, and Background Pattern to be printed on paper. Reference To specify and detect a Password Copy: Select [Utility/Counter] ö [Administrator Settings] ö [Security Settings] ö [Security Details] ö [Password Copy]. 5-54 bizhub C652/C652DS/C552/C452 (Version 2)
Page 131: Stamp Repeat
Select Yes to print the serial number of this ma- chine. For details on setting for the serial number, contact your service representative. Distribution Control Prints the distribution control number. Number Specify the distribution control number using a val- ue between 1 and 99999999. bizhub C652/C652DS/C552/C452 (Version 2) 5-55...
Page 132 Stamp Repeat text to be deleted. Reference To delete a registered stamp: Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Settings] ö [Stamp Settings] ö [Delete Registered Stamp]. 5-56 bizhub C652/C652DS/C552/C452 (Version 2)
Page 133: Header/Footer
Select the Text Color, Text Size and Text Type. Reset Reset the settings to the initial contents. Reference To register a header/footer: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Stamp Settings] ö [Header/Footer Settings]. bizhub C652/C652DS/C552/C452 (Version 2) 5-57...
Page 134: Watermark
Select a watermark from the eight types available. The watermark selected is printed over the original image. Text Color Select the watermark color from [Black], [Magenta] and [Cyan]. The watermark is printed in the selected color. 5-58 bizhub C652/C652DS/C552/C452 (Version 2)
Page 135: Overlay
Use the keypad to enter the density of an overlay image (using a value be- tween 20 to 100%). Color Select the color of overlay image from [full color], [black], [red], [blue], [green], [yellow], [cyan], or [magenta]. bizhub C652/C652DS/C552/C452 (Version 2) 5-59...
Page 136: Registered Overlay
You cannot select an overlay image when no overlay has been regis- tered. Thumbnail View In the screen view, you can check overlay images. Display Name In the Display Name mode, you can check overlay images using their file names. Select the desired overlay image. 5-60 bizhub C652/C652DS/C552/C452 (Version 2)
Page 137 Select the photo size. Reference To prohibit changing the overlay registration: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Restrict User Access] ö [Restrict Access to Job Settings] ö [Change Registered Overly]. bizhub C652/C652DS/C552/C452 (Version 2) 5-61...
Page 138: Card Copy
You can copy a card with the full size or enlarge an image to fit paper. Reference To specify the default of Card Copy: Select [Utility/Counter] ö [Administrator Settings] ö [Copier Settings] ö [Card Copy]. 5-62 bizhub C652/C652DS/C552/C452 (Version 2)
Page 139: Save In User Box
Save & Print [Yes]: Select to copy the scanned original and save it in the specified User Box. [No]: Select to save the data of the scanned original in the specified User Box. bizhub C652/C652DS/C552/C452 (Version 2) 5-63...
Page 140: Left Panel Display
Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Settings] ö [Security Details] ö [Hide Personal Information]. To delete all job logs: Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Settings] ö [Security Details] ö [Initialize] ö [Job History]. 5-64 bizhub C652/C652DS/C552/C452 (Version 2)
Page 141: Job List
Opens the screen for checking fax reception jobs. For details, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]". Save Opens the screen for saving jobs. For details, refer to the "User's Guide [Box Operations]". bizhub C652/C652DS/C552/C452 (Version 2) 5-65...
Page 142 Displays only jobs that were completed nor- mally. All Jobs Displays all jobs. Detail Check the status, results, error details, user name, queued time, completed time, number of original pages and number of copies for jobs in the Job History list. 5-66 bizhub C652/C652DS/C552/C452 (Version 2)
Page 143: Check Job
From the Check Job Settings screens, the current copy settings can be checked and changed if desired. Press [Check Job] ö [Check Details]. Check the copy settings. To change the copy settings, press the relevant button. After checking the settings, press [Close]. bizhub C652/C652DS/C552/C452 (Version 2) 5-67...
Page 144 Left panel display 5-68 bizhub C652/C652DS/C552/C452 (Version 2)
Page 145: User Settings
User Settings...
Page 147 Register Authentication In- Register or delete the biometric authentication information or IC card au- formation thentication information of the current login user. Cellular Phone/PDA Set- Configure settings to print data from a cellular phone or PDA. ting bizhub C652/C652DS/C552/C452 (Version 2)
Page 148: System Settings
Auto Color setting is selected. Power Save Settings Refer to page 7-4. Appears when user access is permitted under Administrator settings. Output Settings Refer to page 7-5. AE Level Adjustment Refer to page 7-11. bizhub C652/C652DS/C552/C452 (Version 2)
Page 149 Auto Paper Select for Small Prohibit Copy Original Blank Page Print Settings Do Not Print Page Number Print Posi- Left & Right Bind: All the Same tion Top & Bottom Bind: All the Same Select Keyboard Local Keyboard bizhub C652/C652DS/C552/C452 (Version 2)
Page 150 Reference To enable Auto Paper: Press [Basic] ö [Paper] ö [Auto Paper]. To enable Auto Color: Press [Basic] ö [Color] ö [Auto Color]. To configure Background Removal to Auto: Press [Quality/Density] ö [Background Removal] ö [Auto]. bizhub C652/C652DS/C552/C452 (Version 2)
Page 151: Custom Display Settings
Configure whether to display a list of jobs in proc- ess and in queue or to display the progress of the current job in process, when the default display of the left panel set to "Job List". bizhub C652/C652DS/C552/C452 (Version 2)
Page 152 Public tings) Shortcut Key 1/Shortcut Key 2 (User Box Settings) Copy Operating Screen Color Selection Settings Green Left Panel Display Default Job List Job Display Setting List Display Uppercase and lowercase Differentiate letters Search Option Screen bizhub C652/C652DS/C552/C452 (Version 2)
Page 153: Copier Settings
Auto Zoom (Platen) Appears when user access is permitted under Administrator settings. For details, refer to page 7-46. Auto Zoom (ADF) Specify Default Tray when APS Off Select Tray for Insert Sheet bizhub C652/C652DS/C552/C452 (Version 2)
Page 154 Separate Scan Output Page Print Method Enlargement Rotation Allow Auto Zoom (Platen) Auto Zoom (ADF) Specify Default Tray when Tray Before APS ON APS Off Select Tray for Insert Sheet Tray 2 Tri-Fold Print Side Inside 6-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 155 Multiple Sheets Print Jobs During Copy Accept Operation Automatic Image Rotation When Auto Paper/Auto Zoom Is Set Finishing Program Card Shot Layout: Top/Bottom Zoom: Full Size Store Original Size: X: 89.0 mm Y: 51.0 mm bizhub C652/C652DS/C552/C452 (Version 2) 6-11...
Page 156: Fax/Scan Settings
Press the [Utility/Counter] key ö [User Settings] ö [Change Password]. Enter the previous password, and then press [OK]. Enter a new password. Press [Password Confirmation], and then enter the new password again. Press [OK]. The new password is registered. 6-12 bizhub C652/C652DS/C552/C452 (Version 2)
Page 157: Change E-Mail Address
Change the icon specified as registered user information. When logged in as a registered user, you can change the E-mail address. Press the [Utility/Counter] key ö [User Settings] ö [Change Icon]. Select the icon and press [OK]. bizhub C652/C652DS/C552/C452 (Version 2) 6-13...
Page 158: Register Authentication Information
Authentication Settings] ö [User Registration] ö [Function Permission] ö [Biometric/IC Card Info. Registration] ö [Allow]. Log in as a registered user. Select [Utility/Counter] ö [User Settings] ö [Register Authentication Settings]. Press [Edit]. To delete authentication information, press [Delete]. For biometric authentication For IC card authentication 6-14 bizhub C652/C652DS/C552/C452 (Version 2)
Page 159: Cellular Phone/Pda Setting
For IC card authentication, place your IC card on the Authentication Unit, and press [OK]. Press [Close]. 6.10 Cellular Phone/PDA Setting Configure settings to print data in a cellular phone or PDA through this machine. For details, refer to the "User's Guide Box Operations" and "User's Guide Print Operations". bizhub C652/C652DS/C552/C452 (Version 2) 6-15...
Page 160 Cellular Phone/PDA Setting 6.10 6-16 bizhub C652/C652DS/C552/C452 (Version 2)
Page 161: Administrator Settings
Administrator Settings...
Page 163 Configure settings to restrict the functions of this machine for processing secret data. License Settings Enable an optional i-Option function. OpenAPI Authentication Configure settings to prevent our deprecated OpenAPI connection appli- Management Settings cation from being registered in this machine. bizhub C652/C652DS/C552/C452 (Version 2)
Page 164: System Settings
Low Power Mode Settings has elapsed. Immediately Enters the power save mode in a short time. Factory default Low Power Mode Settings 15 minutes Sleep Mode Settings 30 minutes Power Save Key Lower Enter Power Save Mode Immediately bizhub C652/C652DS/C552/C452 (Version 2)
Page 165: Output Settings
Copy: Tray 2 • Print: Tray 2 • Print Reports: Tray 1 • Fax: Tray 1 [Tray 3] is displayed when the Job Separator JS-603 is installed in the Fin- isher FS-527. Shift Output Each Job bizhub C652/C652DS/C552/C452 (Version 2)
Page 166: Date/Time Settings
Configure the current date and time. Monthly Daily Hour Minute Time Zone Configure the UTC (Coordinate Universal Time) related time zone. Factory default Time Zone +00:00 Reference To cancel the current settings: Press the [C] key. bizhub C652/C652DS/C552/C452 (Version 2)
Page 167: Daylight Saving Time
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Daylight Saving Time]. Settings Configure whether to use daylight saving time and the time difference from UTC (Coordinate Universal Time). Factory default Daylight Saving Time bizhub C652/C652DS/C552/C452 (Version 2)
Page 168: Weekly Timer Setting
• To make the user to enter the password, you need to specify the pass- word. Factory default Weekly Timer ON/OFF Set- tings Select Time for Power Save Password for Non-Busi- ness Hours bizhub C652/C652DS/C552/C452 (Version 2)
Page 169: Restrict User Access
IC card authentication information of the user. Restrict Operation Restrict Broadcast- This setting is for the network scan, fax, and net- work fax operations. For details, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]". bizhub C652/C652DS/C552/C452 (Version 2)
Page 170 Changing Job Priority Allow Delete Other User Jobs Restrict Registering and Changing Allow Addresses Changing Zoom Ratio Allow Changing the "From" Ad- Restrict dress Change Registered Over- Allow Biometric/IC card Informa- Restrict tion Registration Restrict Broadcasting 7-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 171: Expert Adjustment
(This item is displayed when the Fin- isher FS-526 and Saddle Stitcher SD-508 are installed.) Punch Vertical Position Adjust- p. 7-18 ment (This item is displayed when the Fin- isher FS-526 and Punch Kit PK-516 are installed.) bizhub C652/C652DS/C552/C452 (Version 2) 7-11...
Page 172 Paper Separation Adjust- Adjust the paper position where the two sides are separated for 2-sided ment print. Color Registration Adjust Correct color shifts if they are detected in the print result. For details, refer to page 7-23. 7-12 bizhub C652/C652DS/C552/C452 (Version 2)
Page 173 "Bevel" or "Rectangular" accord- ingly. [Specify]: Allows you to manually specify an erase method and original density. As an erase method, select "Bevel" or "Rectangular". Specify an original density from five levels. bizhub C652/C652DS/C552/C452 (Version 2) 7-13...
Page 174 0 dot Prior Detection Setting Warning Display: TYPE1 Detection Level: Std. Prior Detection Setting (front) Warning Display: TYPE1 Detection Level: Std. Prior Detection Setting (back) Feed Cleaning Settings Remove Non-Image Area Erase Op- Auto eration Settings 7-14 bizhub C652/C652DS/C552/C452 (Version 2)
Page 175: Leading Edge Adjustment
Check that the distance from the starting print position of the test pattern to the left edge of the paper (b) is 3.0 mm (+/-0.5 mm). % Press [+] or [-] to adjust the width. Press the [Start] key to print a test pattern. Press [OK]. bizhub C652/C652DS/C552/C452 (Version 2) 7-15...
Page 176: Media Adjustment
Press [OK]. Create a sample, and check the print result. Reference To adjust the half-fold position: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [Half-Fold Position]. 7-16 bizhub C652/C652DS/C552/C452 (Version 2)
Page 177: Half-Fold Position
ö [Finisher Adjustment] ö [Tri-Fold Position Adjustment]. Select the size of paper of which tri-fold position is adjusted. Press [+] or [-] to adjust the tri-fold position while checking the sample. Press [OK]. Create a sample, and check the print result. bizhub C652/C652DS/C552/C452 (Version 2) 7-17...
Page 178: Punch Vertical Position Adjustment
% First, select the paper type if the finisher FS-527 and punch kit PK-517 are installed. Press [+] or [-] to adjust the punched hole position while checking the sample. Press [OK]. Create a sample, and check the print result. 7-18 bizhub C652/C652DS/C552/C452 (Version 2)
Page 179: Punch Regist Loop Size Adjustment
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [Punch Edge Sensor Adjustment]. Press the [Start] key. The punch edge sensor is automatically adjusted. The adjusted result appears. bizhub C652/C652DS/C552/C452 (Version 2) 7-19...
Page 180: Vertical Punch (Z-Fold) Position Adjustment
Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [Horizontal Punch (Z-Fold) Position Adjustment]. Press [+] or [-] to adjust the punched hole position while checking the sample. Press [OK]. Create a sample, and check the print result. 7-20 bizhub C652/C652DS/C552/C452 (Version 2)
Page 181: 1St Z-Fold Position Adjustment
2nd Z-Fold Position Before making any adjustments, create a sample using the Z-fold function. Adjust the center staple position while checking the created sample. This adjustment is available if the Z Folding Unit is installed. bizhub C652/C652DS/C552/C452 (Version 2) 7-21...
Page 182: Punch Unit Size Detect Sensor
Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [Punch Unit Size Detect Sensor]. Press [Start]. % The punch unit edge sensor is automatically adjusted. % The adjusted result appears. 7-22 bizhub C652/C652DS/C552/C452 (Version 2)
Page 183: Color Registration Adjust
% Press [+] or [-] to adjust the color line to be corrected while checking the sample. The color registration is adjusted. Press the [Start] key to print a test pattern, and then check the print result. Press [OK]. bizhub C652/C652DS/C552/C452 (Version 2) 7-23...
Page 184: Gradation Adjustment
Place 10 or more sheets of blank paper on top of the test pattern to prevent it from becoming transparent. Close the ADF. Press the [Start] key. The test pattern is scanned. The gradation level is automatically adjusted. Repeat steps 5 through 11 two more times. 7-24 bizhub C652/C652DS/C552/C452 (Version 2)
Page 185: List/Counter
Counter Clear Resets the count to 0. Paper Size Select the paper size of the counter. Paper Type Select the paper type of the counter. Factory default Job Settings List • 1-Sided • Tray 1 bizhub C652/C652DS/C552/C452 (Version 2) 7-25...
Page 186: Reset Settings
ADF. Next Job Configure whether to reset the following settings when the next job is selected. • Staple Setting • Original Set/Bind Direction • Reset Data After Job The destination of data is always reset. 7-26 bizhub C652/C652DS/C552/C452 (Version 2)
Page 187: User Box Settings
• This item may not be displayed on product sales areas. European model (cm) only Foolscap Size Setting Select the size that you want to use when the paper size is close to 13 inch- bizhub C652/C652DS/C552/C452 (Version 2) 7-27...
Page 188: Stamp Settings
Change the selected header or footer. Fax TX Settings This setting is for the fax and network fax operations. For details, refer to the "User's Guide [Network Scan/Fax/Network Fax Op- erations]". Factory default FAX TX Settings Cancel 7-28 bizhub C652/C652DS/C552/C452 (Version 2)
Page 189: Blank Page Print Settings
Configure whether to skip a job in the fax mode. Other than Fax Configure whether to skip a job in a mode other than the fax mode. Factory default Skip Job Operation Set- Fax: Yes tings Other than Fax: Yes bizhub C652/C652DS/C552/C452 (Version 2) 7-29...
Page 190: Default Bypass Paper Type Setting
Factory default Default Bypass Paper Type Setting Paper Type: Plain Paper 7.1.16 Advanced Preview Setting Configure settings to fax or scan a document. For details, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]". 7-30 bizhub C652/C652DS/C552/C452 (Version 2)
Page 191: Page Number Print Position
Top & Bottom Bind: All the Same Left & Right Bind: Symmet- rical Top & Bottom Bind: Sym- metrical Factory default Page Number Print Posi- Left & Right Bind: All the Same tion Top & Bottom Bind: All the Same bizhub C652/C652DS/C552/C452 (Version 2) 7-31...
Page 192: Administrator/Machine Settings
The E-mail address can be used for Internet fax. Factory default Device Name The default abbreviation is input for the product name. If necessary, it can be changed freely. 7-32 bizhub C652/C652DS/C552/C452 (Version 2)
Page 193: One-Touch/User Box Registration
One-Touch/User Box Registration One-Touch/User Box Registration This setting is for the User Box, network scan, fax, and network fax operations. For details, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]" and "User's Guide [Box Operations]". bizhub C652/C652DS/C552/C452 (Version 2) 7-33...
Page 194: User Authentication/Account Track
Settings can be configured for the both and used without being synchronized. A total of 1,000 users and accounts can be registered. To register more than 1,000, use PageScope Authentication Manager. You can register up to 30,000 users and accounts. 7-34 bizhub C652/C652DS/C552/C452 (Version 2)
Page 195: General Settings
Select an authentication method when configuring account track settings. Account Name & Enter the account name and password to log in. Password Password Only Enter only the password to log in. • You cannot configure this when user authen- tication settings are configured. bizhub C652/C652DS/C552/C452 (Version 2) 7-35...
Page 196 Ticket Hold Time Setting 60 min. Reference To configure external server settings: Press the [Utility/Counter] key ö [Administrator Settings] ö [User Authentication/Account Track] ö [External Server Settings]. For details on enhanced security settings, contact your service representative. 7-36 bizhub C652/C652DS/C552/C452 (Version 2)
Page 197: User Authentication Settings
When using this machine while the ID & print function is disabled, the user can select [Access] to log in to this machine without specifying the operation to be carried out after authentication. bizhub C652/C652DS/C552/C452 (Version 2) 7-37...
Page 198 • Manual Destination Input (If [Allow] is select- ed, specify either to allow Manual Destination Input or manage the destination manually.) • Limited Color Print (Public user only) • Biometric/IC Card Regist. Info. • Mobile/PDA 7-38 bizhub C652/C652DS/C552/C452 (Version 2)
Page 199 Pause Continue Job Icon Reference To specify the maximum number of registrations for the user: Press the [Utility/Counter] key ö [Administrator Settings] ö [User Authentication/Account Track] ö [General Settings] ö [Number of User Counters Assigned]. bizhub C652/C652DS/C552/C452 (Version 2) 7-39...
Page 200: Account Track Settings
Configure the number of copies that can be output by a member of the account. • Individual Allowance Configure the number of black copies and color copies that can be output by a member of the account. 7-40 bizhub C652/C652DS/C552/C452 (Version 2)
Page 201: Print Without Authentication
Press the [Utility/Counter] key ö [Administrator Settings] ö [User Authentication/Account Track] ö [General Settings] ö [Number of User Counters Assigned]. 7.4.4 Print without Authentication This setting is for the print operations. For details, refer to the "User's Guide [Print Operations]". bizhub C652/C652DS/C552/C452 (Version 2) 7-41...
Page 202: Print Counter List
Select Print (1-Sided) or Print (2-Sided). Print Item Configure whether to print all data or printing data only. Factory default Print Counter List • Paper Tray: Tray 1 • Simplex/Duplex: 1-Sided • Print Item: All Data 7-42 bizhub C652/C652DS/C552/C452 (Version 2)
Page 203: External Server Settings
For details on configuring external server settings, refer to the "User's Guide [Network Administrator]". 7.4.7 Limiting Access to Destinations This setting is for the network scan, fax, and network fax operations. For details, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]", "User's Guide [Network Administrator]". bizhub C652/C652DS/C552/C452 (Version 2) 7-43...
Page 204: Authentication Device Settings
Logoff Settings Configure whether to log out when scanning of the original finishes. 7-44 bizhub C652/C652DS/C552/C452 (Version 2)
Page 205: User/Account Common Setting
Scan/Fax/Network Fax Operations]" and "User's Guide [Network Administrator]". 7.4.11 Scan to Authorized Folder Settings This setting is for the network scan, fax, and network fax operations. For details, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]" and "User's Guide [Network Administrator]". bizhub C652/C652DS/C552/C452 (Version 2) 7-45...
Page 206: Network Settings
Specify where to place the front and back sides of a card. Zoom Specify to copy a card with the full size or enlarge an image to fit paper. Store Original Size Change and register the pre-specified original size or [Original Name]. 7-46 bizhub C652/C652DS/C552/C452 (Version 2)
Page 207: Printer Settings
This setting is for the print operations. For details, refer to the "User's Guide [Print Operations]". Fax Settings This setting is for the fax and network fax operations. For details, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]". bizhub C652/C652DS/C552/C452 (Version 2) 7-47...
Page 208: System Connection
[Login Name] and [Password] • When user authentication is performed or when acquiring the device information with the PageScope Authentication Manager, set the Authentication setting of the OpenAPI Setting screen of the machine to [OFF]. 7-48 bizhub C652/C652DS/C552/C452 (Version 2)
Page 209 Non-SSL Only Client Certificates Disable Validity Period Confirm Key Usage Do Not Confirm Chain Do Not Confirm Expiration Date Confirma- Do Not Confirm tion Do Not Confirm Authenticate Automatic Prefix/Suffix Setting Cellular Phone/PDA Set- Restrict ting bizhub C652/C652DS/C552/C452 (Version 2) 7-49...
Page 210: Security Settings
Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Settings] ö [Security Details] ö [Password Rules]. 7.10.2 User Box Administrator Setting Configure settings for the User Box operations. For details, refer to the "User's Guide [Box Operations]". 7-50 bizhub C652/C652DS/C552/C452 (Version 2)
Page 211: Administrator Security Levels
Blank Page Print Settings • Change E-Mail Address • Print Jobs During Copy Operation Prohibit Does not allow the user to change the settings allowed in Level 1 and Level Factory default Administrator Security Lev- Prohibit bizhub C652/C652DS/C552/C452 (Version 2) 7-51...
Page 212: Security Details
""", "+", and "space" is restricted. • A password that consists of a repetition of the same character cannot be specified. • The same password as one before being changed cannot be regis- tered. 7-52 bizhub C652/C652DS/C552/C452 (Version 2)
Page 213 Display Activity Log This setting is for the fax and network fax operations. For details, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]". Initialize Initializes Job History, Network Settings, Copy Program, or Store Address. bizhub C652/C652DS/C552/C452 (Version 2) 7-53...
Page 214 Manual Destination Input Allow All Print Data Capture Allow Job Log Settings Restrict Fax TX Hide Personal Information Hide Personal Information (MIB) Display Activity Log Job History Thumbnail Dis- play Secure Print Only Copy Guard Password Copy 7-54 bizhub C652/C652DS/C552/C452 (Version 2)
Page 215: Enhanced Security Mode
In [Write User], [Security Level] cannot be set to SNMP v3 Settings [OFF]. Network Settings / TCP Socket Settings [Use SSL/TLS] is set to [ON]. Network Settings / WebDAV Settings / WebDAV Set to [SSL Only]. Server Settings / SSL Setting bizhub C652/C652DS/C552/C452 (Version 2) 7-55...
Page 216: Hdd Settings
Different screens appear depending on the current settings. 7.10.6 HDD Settings This setting is for the hard disk operations. For details, refer to the "User's Guide [Box Operations]". 7-56 bizhub C652/C652DS/C552/C452 (Version 2)
Page 217: Function Management Settings
User Boxes • Using PageScope Scan Direct to retrieve doc- uments in User Boxes • Box operations using PageScope Web Con- nection (The User Box tab does not appear.) Factory default Network Function Usage Settings bizhub C652/C652DS/C552/C452 (Version 2) 7-57...
Page 218: Stamp Settings
Sending: Do Not Apply Reference To configure copy protect and stamp repeat settings: Press [Application] ö [Stamp/Composition]. 7.10.9 Driver Password Encryption Setting This setting is for the print operations. For details, refer to the "User's Guide [Print Operations]". 7-58 bizhub C652/C652DS/C552/C452 (Version 2)
Page 219: License Settings
Enter the function code and license code obtained from the license man- agement server (LMS). Reference When the functions of an optional component i-Option LK-101, LK-102 or LK-105 are enabled, the enabled functions can be checked with [List of Enabled Functions]. bizhub C652/C652DS/C552/C452 (Version 2) 7-59...
Page 220: Openapi Authentication Management Settings
OpenAPI Authentication Management Settings 7.12 7.12 OpenAPI Authentication Management Settings Configure settings to prevent our deprecated OpenAPI connection application from being registered in this machine. For details, contact your service representative. 7-60 bizhub C652/C652DS/C552/C452 (Version 2)
Page 221: Maintenance
Maintenance...
Page 223: Paper
Paper storage Store paper in a cool, dark location with little humidity. If the paper becomes damp, a paper jam may occur. Store the paper flat, not on its edge. Curled paper may cause a paper jam. bizhub C652/C652DS/C552/C452 (Version 2)
Page 224: Loading Paper
% If special paper is loaded, the paper type must be specified. % Load letterhead paper so that the side to be printed on faces down. Close tray 1. Reference To configure paper settings: Press [Basic] ö [Paper]. bizhub C652/C652DS/C552/C452 (Version 2)
Page 225: Loading Paper Into Trays 3 And 4
% Load letterhead paper so that the side to be printed on faces down. % To change the paper size for tray 3, contact your service representative. Lower the paper take-up roller, and then close tray 3. Reference To configure paper settings: Press [Basic] ö [Paper]. bizhub C652/C652DS/C552/C452 (Version 2)
Page 226: Loading Paper Into The Bypass Tray
Expel air from the envelopes, and then load them while holding the folds of the envelopes. Load them with the flap side up, as shown in the illustration. The flap side of envelopes cannot be printed on. bizhub C652/C652DS/C552/C452 (Version 2)
Page 227 % OHP transparencies can be printed only in black. Before selecting OHP transparencies, select [Black] in the Color tab. % If you select [A6 Card w], the paper type is automatically set to [Thick 3]. Reference To configure paper settings: Press [Basic] ö [Paper]. bizhub C652/C652DS/C552/C452 (Version 2)
Page 228: Loading Paper Into The Lct
% If paper is curled, flatten it before loading it. % If special paper is loaded, the paper type must be specified. % Load letterhead paper so that the side to be printed on faces Reference To configure paper settings: Press [Basic] ö [Paper]. bizhub C652/C652DS/C552/C452 (Version 2)
Page 229: Consumables
Replace them according to the guidance contained in your maintenance agreement. Do not replace any color other than the one indicated in the message in the touch panel. For the Toner Cartridge, the machine stops operating after the message appears. Toner Cartridge bizhub C652/C652DS/C552/C452 (Version 2)
Page 230 Replacement by user Replacement by service representative If a Toner Cartridge other than for black or the Imaging Unit is empty, printing can continue using black. Press [Continue], and then select the job to be printed. 8-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 231: Checking Consumables Status
In the Check Consumable Life screen, you can check the status (usage level) of consumables. Press the [Utility/Counter] key. Press [Check Consumable Life]. % To print the list of usage levels, press [Print List], then [Start] or the [Start] key. bizhub C652/C652DS/C552/C452 (Version 2) 8-11...
Page 232: Viewing Counters
% To display the Coverage Rate screen, press [Coverage Rate]. <Meter Count> Item Description Total The cumulative total number of pages printed Black The total number of pages printed in black Color The total number of pages printed in color 8-12 bizhub C652/C652DS/C552/C452 (Version 2)
Page 233 PC Total The total number of pages The total number of pages printed printed according to the on large-sized paper according to print instructions received the print instructions received from the PC from the PC bizhub C652/C652DS/C552/C452 (Version 2) 8-13...
Page 234: Checking The Total Number Of Pages Printed
The total number of pages printed in 2-Sided mode • When printed in 2-Sided mode, two pages are counted as one print. Checking the total number of pages printed Pressing Total Counter displays the total number of pages printed to date. Total Counter 8-14 bizhub C652/C652DS/C552/C452 (Version 2)
Page 235: Cleaning Procedure
Cleaning procedure Cleaning procedure Slit glass (bizhub C652/C552/C452) NOTICE Do not touch the slit glass. Open the ADF, and then remove the slit glass cleaner. Wipe stains off the slit glass using the slit glass cleaner. % Wipe off stains from the back side to the front side along the guide.
Page 236: Slit Glass (Back) (Bizhub C652Ds)
Close the opening and closing guide that was opened in step 2. % Press the hand-shaped mark on the center of the opening and closing guide, and make sure that the guide is locked securely. 8-16 bizhub C652/C652DS/C552/C452 (Version 2)
Page 237: Original Glass, Control Panel, Paper Take-Up Roller
Wipe the surface using a soft, dry cloth. Housing, document pad NOTICE Never use solvents, such as benzene or thinner, to clean the document pad. Wipe the surface using a soft cloth moistened with a mild household detergent. bizhub C652/C652DS/C552/C452 (Version 2) 8-17...
Page 238 Cleaning procedure 8-18 bizhub C652/C652DS/C552/C452 (Version 2)
Page 239: Troubleshooting
Troubleshooting...
Page 241: When The Message "Trouble" Appears (Call A Service Representative)
If a defective part can be separated in order to be able to continue operations after a problem has been detected, [Continue] or [Recover Data] is displayed. To continue operations, select any key. However, the problem has not been resolved, so contact your service representative immediately. bizhub C652/C652DS/C552/C452 (Version 2)
Page 242: Problems That Cannot Be Corrected By The User
Write down the malfunction code in the Service Call screen. Turn off the [sub power switch]. Turn off the [main power switch]. Unplug the machine. Contact your service representative and inform them of the written down malfunction code. bizhub C652/C652DS/C552/C452 (Version 2)
Page 243: Troubleshooting Table
In the Back- ground Removal screen, select a lighter background density. (p. 5-20) Is the electrostatic charger wire Use the charger-cleaning tool to dirty? clean the electrostatic charger. (p. 9-13) bizhub C652/C652DS/C552/C452 (Version 2)
Page 244 Is the original one that does not Check that the original is one meet the specifications? that can be loaded into the ADF. (p. 12-3) Is the original correctly loaded? Position the original correctly. (p. 3-5) bizhub C652/C652DS/C552/C452 (Version 2)
Page 245 10 to 25 mm), a correct image cannot be obtained, and scanning may not finish. Try "stretching your fin- ger", "placing your finger deep- ly", or "placing your finger shallowly" on the scanning sec- tion. bizhub C652/C652DS/C552/C452 (Version 2)
Page 246 USB unit to this machine? cable from this machine or au- thentication unit, and then con- nect it again. Wait at least 10 seconds, and then turn on the main power of this machine. bizhub C652/C652DS/C552/C452 (Version 2)
Page 247: Main Messages And Their Remedies
Or contact your service representative. Install the waste toner box and The waste toner box is not in- Reinstall each consumable and close all doors. stalled correctly. replaceable part. Or contact your service representative. bizhub C652/C652DS/C552/C452 (Version 2)
Page 248 The slit glass (back) is dirty. User the slit glass cleaner to side of the ADF with the glass clean it. cleaner. Continuing using the machine in this condition may cause lines to appear in the out- put. 9-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 249 Wait boards may be connected. at least 10 seconds, and then turn on the main power of this machine. bizhub C652/C652DS/C552/C452 (Version 2) 9-11...
Page 250: Icons That Appear In The Touch-Panel Screen
USB connection is not enabled. Indicates that the job is in the waiting-for-redial status because, for exam- ple, the recipient's line is busy when sending with the G3 Fax or IP Address Fax function. 9-12 bizhub C652/C652DS/C552/C452 (Version 2)
Page 251: If Print Quality Is Deteriorated
Slowly pull out the charger-cleaning tool as far as possible. Next, slowly push in the charger-cleaning tool as far as possible. Repeat the above operations three times. Securely insert the charger-cleaning tool, and then close the front door. bizhub C652/C652DS/C552/C452 (Version 2) 9-13...
Page 252: Cleaning The Print Head
Pull out tray 1. Remove the print head glass cleaning tool from tray 1. Open the machine's lower front door. Release the securing levers for the waste toner box, and then remove the waste toner box. 9-14 bizhub C652/C652DS/C552/C452 (Version 2)
Page 253 Insert the print head glass cleaning tool into the print head cleaning opening, pull it out, and then repeat this back-and-forth movement two or three times. Install the waste toner box. Place back the print head glass cleaning tool to tray 1. Close tray 1. bizhub C652/C652DS/C552/C452 (Version 2) 9-15...
Page 254 If print quality is deteriorated 9-16 bizhub C652/C652DS/C552/C452 (Version 2)
Page 255: Authentication Unit (Biometric Type)
Authentication unit (biometric type)
Page 257: Using An Authentication Unit (Biometric Type)
Status indicator LEDs Status Lit in green Ready state or authentication is completed Flash in green During authentication or scanning operation Lit in red Authentication failed or scanning failed Unlit The authentication unit is not recognized bizhub C652/C652DS/C552/C452 (Version 2) 10-3...
Page 258 This section explains how to configure the required settings in this machine, register users, and log in with authentication. 10-4 bizhub C652/C652DS/C552/C452 (Version 2)
Page 259: Configuring This Machine
Use the control panel of this machine to display the Administrator Settings screen. Press [4 User Authentication/Account Track], then [1 General Settings]. Set [User Authentication] to "ON (MFP)", and then press [OK]. Press [Yes], and then [OK]. Press [8 Authentication Device Settings]. Press [1 General Settings]. Press [Bio Authentication]. bizhub C652/C652DS/C552/C452 (Version 2) 10-5...
Page 260 For details on how to log in to this machine, refer to page 10-19. Press [OK] twice. Press [2 Logoff Settings]. Specify whether to log out the user when scanning the original has finished after the user logged in with the authentication unit. Press [OK]. Press [Close] twice. 10-6 bizhub C652/C652DS/C552/C452 (Version 2)
Page 261: Registering A User
Authentication/Account Track], and then [2 User Authentication Settings]. NOTICE [2 User Authentication Settings] is disabled when User Authentication is set to [OFF] in General Settings. Press [2 User Registration]. Select a desired registration number, and then press [Edit]. Press [Register Auth. Info.]. bizhub C652/C652DS/C552/C452 (Version 2) 10-7...
Page 262: Registering A User Using Data Administrator
BioDriver (USB-Driver) of the authentication unit, and then install Data Administrator Bio Plugin. NOTICE Before setup, install Data Administrator V4.0 or later in your computer. For the Data Administrator operating environment and installation procedure, refer to the Data Administrator User's Guide. 10-8 bizhub C652/C652DS/C552/C452 (Version 2)
Page 263: Checking The Version Of The Installed Data Administrator
Connect the authentication unit to the USB port of your computer. The "Found New Hardware" dialog box appears. Select "Locate and install driver software (recommended)". Insert the application DVD-ROM provided with the authentication unit into the DVD-ROM drive of the computer. bizhub C652/C652DS/C552/C452 (Version 2) 10-9...
Page 264 Check that the driver's search location is the application DVD-ROM, and then click the [Next]. % When the driver's search location is not the application DVD-ROM, click the [Browse]. Select the BioDriver (USB-Driver) folder on the DVD-ROM, and then click the [OK]. 10-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 265 Install Data Administrator Bio Plugin. Open the DA_Bio_Plugin folder on the application DVD-ROM, and then click setup.exe. Select a language, and then click the [OK]. The installation program starts. Follow the on-screen instructions to proceed with the installation. bizhub C652/C652DS/C552/C452 (Version 2) 10-11...
Page 266 Using an authentication unit (biometric type) 10.1 Click the [Next]. Select "I accept the terms in the license agreement", and then click the [Next]. Click the [Install]. 10-12 bizhub C652/C652DS/C552/C452 (Version 2)
Page 267: User Registration
USB power supply, resulting in an operation failure. To use the USB hub, be sure to connect the self-power USB hub that supplies 500 mA or more. Restart the procedure 5 or more seconds after connecting the authentication unit. bizhub C652/C652DS/C552/C452 (Version 2) 10-13...
Page 268 The Device Information window appears. % For details on how to import device information, refer to the Data Administrator User's Guide. In Select Function, select "Authentication Settings" - "User Setting", and then click the [Add]. 10-14 bizhub C652/C652DS/C552/C452 (Version 2)
Page 269 Select the desired template, and then click the [OK]. The User Registration window appears. Enter the user name and password, select the "AU-101" or "AU-102" tab, and then click the [Import]. % Enter the E-mail address and other information as required. bizhub C652/C652DS/C552/C452 (Version 2) 10-15...
Page 270 % If the authentication test has failed, place your finger on the authentication unit again, and click [Authentication Test]. % If the authentication has failed, click [Reset] to repeat the scanning process. For authentication unit AU-101 For authentication unit AU-102 Click the [Registration]. 10-16 bizhub C652/C652DS/C552/C452 (Version 2)
Page 271 Using an authentication unit (biometric type) Click the [OK]. % Repeat steps 5 to 10 to register all users. Click the [Export to the device]. % Select the user name and click the [Edit] to change the registered data. bizhub C652/C652DS/C552/C452 (Version 2) 10-17...
Page 272 To turn the main power switch off and on, first turn the main power switch off, and then turn it on after 10 or more seconds has elapsed. Not doing so may result in an operation failure. When connecting or disconnecting the USB cable, hold the plug. Otherwise, the cable may be damaged. 10-18 bizhub C652/C652DS/C552/C452 (Version 2)
Page 273: Logging In To This Machine
Press [ID & PW] to log in by entering the user name and the password, without using the authentication unit. When 1-to-many authentication has been specified Place your finger on the authentication unit. Authentication unit (biometric type) AU-101 Authentication unit (biometric type) AU-102 The basic settings screen appears. bizhub C652/C652DS/C552/C452 (Version 2) 10-19...
Page 274: When 1-To-1 Authentication Has Been Specified
When 1-to-1 authentication has been specified Select [User Name], and enter the user name. Place your finger on the authentication unit. Authentication unit (biometric type) AU-101 Authentication unit (biometric type) AU-102 The basic settings screen appears. 10-20 bizhub C652/C652DS/C552/C452 (Version 2)
Page 275: Authentication Unit (Ic Card Type)
Authentication unit (IC card type)
Page 277: Using Authentication Unit (Ic Card Type)
Authentication unit (IC card type) AU-201 must be installed inside the working table WT-506. Do not disconnect the USB cable while using the authentication unit. Doing so may cause the system to become unstable. Do not leave the IC card within 40 mm of the card reader. bizhub C652/C652DS/C552/C452 (Version 2) 11-3...
Page 278: Configuring This Machine
Use the control panel of this machine to display the Administrator Settings screen. Press [4 User Authentication/Account Track], then [General Settings]. Set [User Authentication] to "ON (MFP)", and then press [OK]. Press [Yes], and then [OK]. Press [8 Authentication Device Settings]. Press [1 General Settings]. Press [Card Authentication]. 11-4 bizhub C652/C652DS/C552/C452 (Version 2)
Page 279 For details on how to log in to this machine, refer to page 10-19. Press [OK] twice. Press [2 Logoff Settings]. Specify whether to log out the user when scanning the original has finished after the user logged in with the authentication unit. Press [OK]. Press [Close] twice. bizhub C652/C652DS/C552/C452 (Version 2) 11-5...
Page 280: Registering A User
Use the control panel of this machine to display the Administrator Settings screen. Press [4 User Authentication/Account Track], and then [2 User Authentication Settings]. Press [2 User Registration]. Select a desired registration number, and then press [Edit]. Press [Register Auth. Info.]. 11-6 bizhub C652/C652DS/C552/C452 (Version 2)
Page 281: Registering A User Using Data Administrator
Card Driver (USB-Driver) of the authentication unit, and then install Data Administrator IC Card Plugin. NOTICE Before setup, install Data Administrator V4.0 or later in your computer. For the Data Administrator operating environment and installation procedure, refer to the Data Administrator User's Guide. bizhub C652/C652DS/C552/C452 (Version 2) 11-7...
Page 282: Checking The Version Of The Installed Data Administrator
If Data Administrator V3.x is installed, it is removed when V4.x is installed. Click the [Plug-in version]. In "Plug-in information list", confirm the plugin version of Data Administrator. % This software is available if the plugin version is "4.x". 11-8 bizhub C652/C652DS/C552/C452 (Version 2)
Page 283: Setup
The "Found New Hardware" dialog box appears. Select "Locate and install driver software (recommended)". Insert the application DVD-ROM provided with the authentication unit into the DVD-ROM drive of the computer. Click the "Browse my computer for driver software (advanced)". bizhub C652/C652DS/C552/C452 (Version 2) 11-9...
Page 284 Check that the driver's search location is the application DVD-ROM, and then click the [Next]. % When the driver's search location is not the application DVD-ROM, click the [Browse]. Select the IC Card Driver (USB-Driver) folder in the DVD-ROM, and click the [OK]. % Installation starts. 11-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 285 Open the IC_Card_Plugin folder on the application DVD-ROM, and then click setup.exe. Select a language, and then click the [OK]. The installation program starts. Follow the on-screen instructions to proceed with the installation. Click the [Next]. bizhub C652/C652DS/C552/C452 (Version 2) 11-11...
Page 286 11.1 Select "I accept the terms in the license agreement", and then click the [Next]. Click the [Install]. Click the [Finish]. Installation of the Data Administrator IC Card Plugin is completed, which completes the setup. 11-12 bizhub C652/C652DS/C552/C452 (Version 2)
Page 287: User Registration
Restart the procedure 5 or more seconds after connecting the authentication unit. Data Administrator starts, and device information of this machine is imported. The Device Information window appears. % For details on how to import device information, refer to the Data Administrator User 's Guide. bizhub C652/C652DS/C552/C452 (Version 2) 11-13...
Page 288 Using authentication unit (IC card type) 11.1 In Select Function, select "Authentication Settings" - "User Setting", and then click the [Add]. Select the desired template, and then click the [OK]. The User Registration window appears. 11-14 bizhub C652/C652DS/C552/C452 (Version 2)
Page 289 Place the IC card on the authentication unit, and click the [Start reading]. % If necessary, select "Input the card ID directly" to register the card ID. Click the [OK]. % Repeat steps 5 to 9 to register all users. bizhub C652/C652DS/C552/C452 (Version 2) 11-15...
Page 290 Click the [Write]. % Data Administrator provides the batch copy function that batch-configures the registered user data in multiple machines with the authentication unit enabled. The registered user data is configured in this machine. Click the [OK]. 11-16 bizhub C652/C652DS/C552/C452 (Version 2)
Page 291: Logging In To This Machine
Press [ID & PW] to log in by entering the user name and the password, without using the authentication unit. When IC card authentication is enabled Place the IC card on the working table. The basic settings screen appears. bizhub C652/C652DS/C552/C452 (Version 2) 11-17...
Page 292: When Ic Card Authentication + Password Authentication Is Enabled
When IC card authentication + password authentication is enabled Place the IC card on the working table. Press [Password], and then enter the password. Press either [Login] or the [Access] key. The basic settings screen appears. 11-18 bizhub C652/C652DS/C552/C452 (Version 2)
Page 293: Specifications
Specifications...
Page 295: Paper
Paper where company names, preset text, and others are already printed. Colored paper. Paper that is registered as one of frequently used paper types. For paper weight and media adjustment settings, contact your service representative. bizhub C652/C652DS/C552/C452 (Version 2) 12-3...
Page 296 When you select Plain Paper, Thick 1, Thick 1+, Thick 2, Thick 3, or Thick 4 for the bypass tray, you can select Duplex 2nd Side. Select Duplex 2nd Side when you load paper where something is printed on one side. 12-4 bizhub C652/C652DS/C552/C452 (Version 2)
Page 297: Machine Specifications
For details, contact your service representative. Banner Paper Width: 210 to 297 mm Length: 457 to 1200 mm Number of sheets loaded in Plain paper 250 sheets output tray Thick 10 sheets Transparency 1 sheet bizhub C652/C652DS/C552/C452 (Version 2) 12-5...
Page 298 Full color: 5.5 sec. or less Black: 3.8 sec. or less C552 Full color: 6.0 sec. or less Black: 4.3 sec. or less C452 Full color: 6.0 sec. or less Black: 4.8 sec. or less 12-6 bizhub C652/C652DS/C552/C452 (Version 2)
Page 299 The dimensions above are measured when the finisher tray extension, pa- per trays and LCU are pulled out, and the ADF is open. Memory size (hard disk ca- 2,048 MB (250 GB) pacity) Weight bizhub C652/C552/C452: Approx. 221 kg bizhub C652DS: Approx. 223 kg bizhub C652/C652DS/C552/C452 (Version 2) 12-7...
Page 300: Automatic Duplex Unit
8-1/2 e 13 w, 8-1/4 e 13 w, 8-1/8 e 13-1/4 w, and 8 e 13 w. Any one of these sizes is selectable. For details, contact your service representative. Power supply Supply from machine Reverse automatic document feeder (bizhub C652/C552/C452) Specification Original feed function 1-sided original, 2-sided original, mixed original...
Page 301: Options
Plain paper (60 to 90 g/m Thick (91 to 300g/m ), transparency, postcard, envelope, label sheet, letterhead paper, colored paper Staple: Plain paper (64 to 90 g/m Thick (91 to 209g/m Can be used only as a cover page bizhub C652/C652DS/C552/C452 (Version 2) 12-9...
Page 302 25 sets 40 sheets 41 sheets - 20 sets 50 sheets 51 sheets - 15 sets 60 sheets 61 sheets - 10 sets 100 sheets Paper loading ca- 100 sheets pacity < Output tray 1> 12-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 303: Saddle Stitcher Sd-508
Plain paper (80 g/m Three sheets stapled 15 sets and folded Four sheets stapled 12 sets Five sheets stapled 8 sets Six to 15 sheets sta- 5 sets pled 16 to 20 sheets sta- 5 sets pled Tri-Fold bizhub C652/C652DS/C552/C452 (Version 2) 12-11...
Page 304: Punch Kit Pk-516
8-1/2 e 13 w, 8-1/4 e 13 w, 8-1/8 e 13-1/4 w, 8 e 13 w. Any one of these sizes is selectable. For details, contact your service representative. Power supply Supply from finisher Size Width 161 mm e Depth 650 mm e Height 234 mm Weight Approx. 4.5 kg 12-12 bizhub C652/C652DS/C552/C452 (Version 2)
Page 305: Z-Folding Unit Zu-606
11 e 17 w, 8-1/2 e 14 w, A3 w, B4 w is selected Power supply Supply from electrical outlet Size Width 169.7 mm e Depth 660 mm e Height 1027.5 mm Weight Approx. 45 kg bizhub C652/C652DS/C552/C452 (Version 2) 12-13...
Page 306: Post Inserter Pi-505
Paper loading capacity Plain paper (60 g/m to 90 g/m 200 sheets < Output tray 1> Thick (91 g/m to 300 g/m ), Transparency, Postcards, 20 sheets Envelope, Label sheets, letterhead paper Paper loading height: 35 mm 12-14 bizhub C652/C652DS/C552/C452 (Version 2)
Page 307 The numbers enclosed in parentheses ( ) indicate the values applied when the tray is pulled output Weight Approx. 42 kg Consumables Staples SK-602 For EH-590 (Product No.505 manufactured by MAX) (5,000 staples includ- ed) e 1 unit bizhub C652/C652DS/C552/C452 (Version 2) 12-15...
Page 308: Saddle Stitcher Sd-509
A4 v, B5 v, 11 e 17 w, 8-1/2 e 11 v, 7-1/4 e 10-1/2 v, 8K w, 16K v Power supply Supply from finisher FS-527 Size Width 58 mm e Depth 470 mm e Height 135 mm Weight Approx. 1.8 kg 12-16 bizhub C652/C652DS/C552/C452 (Version 2)
Page 309: Job Separator Js-603
): 100 sheets, Thick (91 g/m to 300 g/m Transparency, Envelope, Label sheets, Letterhead Paper: 10 sheets Paper loading height: 22 mm Size Width 165 mm e Depth 389 mm e Height 63 mm Weight Approx. 1 kg bizhub C652/C652DS/C552/C452 (Version 2) 12-17...
Page 310: Authentication Unit (Biometric Type) Au-101
TCP/IP Application Microsoft Internet Explorer 6.0 (SP1) or later Microsoft .NET Framework (SP1) or later Interface USB 1.1 or later Supported Operating Systems Windows 2000 Professional (SP4) Windows XP Professional Edition (SP2) Windows Vista Business/Enterprise 12-18 bizhub C652/C652DS/C552/C452 (Version 2)
Page 311: Authentication Unit (Biometric Type) Au-102
TCP/IP Application Microsoft Internet Explorer 6.0 (SP1) or later Microsoft .NET Framework (SP1) or later Interface USB 1.1 or later Supported Operating Systems Windows 2000 Professional (SP4) Windows XP Professional Edition (SP2) Windows Vista Business/Enterprise bizhub C652/C652DS/C552/C452 (Version 2) 12-19...
Page 312: Authentication Unit (Ic Card Type) Au-201
TCP/IP Application Microsoft Internet Explorer 6.0 (SP1) or later Microsoft .NET Framework (SP1) or later Interface USB 1.1 or later Supported Operating Systems Windows 2000 Professional (SP4) Windows XP Professional Edition (SP2) Windows Vista Business/Enterprise 12-20 bizhub C652/C652DS/C552/C452 (Version 2)
Page 313: Appendix
Appendix...
Page 315: Colors
But what about when comparing the yellow of a lemon and the red of a bean? Obviously, the yellow of the lemon is brighter. "Brightness" is this degree of lightness that enables comparison regardless of the hue. bizhub C652/C652DS/C552/C452 (Version 2) 13-3...
Page 316 "saturation", as opposed to "brightness". As opposed to hue and brightness, "saturation" is the characteristic that indicates the degree of vividness. Brightness Saturation 13-4 bizhub C652/C652DS/C552/C452 (Version 2)
Page 317: Red, Green, And Blue
13.1 Colors Red, green, and blue This machine allows you to adjust red, green, and blue in 19 levels. Green Blue bizhub C652/C652DS/C552/C452 (Version 2) 13-5...
Page 318: Image Quality
You can finely adjust the shading of an image. Sharpness: You can adjust the amount of contours in text and images. You can adjust the contrast and copy density in 19 levels and the sharpness in 7 levels. Contrast Copy Density Sharpness 13-6 bizhub C652/C652DS/C552/C452 (Version 2)
Page 319: Color Balance (Cmyk)
Full-color copy reproduces colors of the original by mixing toners of four colors: yellow, magenta, cyan, and black. By changing the amount of each of the four toners, adjust the tints in the copy. You can adjust the color balance in 19 levels. Yellow Green Magenta Cyan Blue Black bizhub C652/C652DS/C552/C452 (Version 2) 13-7...
Page 320: Glossary
Function to use when copying on paper that has already been printed on one side. Duplex/Combine Function to specify the scanning side of the original and the printing side of the paper to be 1-sided or 2-sided. 13-8 bizhub C652/C652DS/C552/C452 (Version 2)
Page 321 (100 pages) that can be loaded into the ADF. You can scan the original and batch-copies it as one copy job. You can also load the original on the original glass or switch to the ADF during scan- ning. bizhub C652/C652DS/C552/C452 (Version 2) 13-9...
Page 322 Function that inserts a blank sheet between transparency films each time a leave transparency film is copied. This function prevents transparency films from stick- ing together. Tri-Fold Function that tri-folds printed paper. Zoom Function that changes the zoom ratio of the copy. 13-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 323: Index
Index...
Page 325: Index By Item
Date/time settings Booklet 5-43 Daylight saving time 5-39 Booklet original 7-30 Default bypass paper type setting Brightness 13-3 Document pad 8-17 2-16 Brightness adjustment dial 7-58 Driver password encryption setting Bypass tray Duplex/Combine Bypass tray door bizhub C652/C652DS/C552/C452 (Version 2) 14-3...
Page 326 2-16 Main power indicator Icon display area 2-18 Main power switch 9-12 Icons Maintenance Image adjustment 5-42 7-16 Media adjustment Image controller Message display area 2-18 13-6 Image quality 8-12 Meter count 5-36 Image Repeat 14-4 bizhub C652/C652DS/C552/C452 (Version 2)
Page 327 Print head glass cleaning tool 5-50 Stamp Print without authentication 7-41 5-55 Stamp repetition 7-49 Printer Information 7-28 7-58 Stamp settings 6-12 7-47 Printer settings 5-46 Stamp/composition 7-42 Printing counter list Staple cartridge 2-28 5-29 Program jobs bizhub C652/C652DS/C552/C452 (Version 2) 14-5...
Page 328 USB port (type B) USB 2.0/1.1 User authentication 7-37 User authentication settings User authentication/account track 7-34 User Box User Box administrator setting 7-50 7-27 User Box settings User settings Utility/Counter 7-20 Vertical Punch (Z-Fold) Position Adjustment Video interface kit 14-6 bizhub C652/C652DS/C552/C452 (Version 2)
Page 329: Index By Button
Automatic Image Rotation Contrast 5-34 5-21 Copied Paper 5-24 Back (Blank) Copier Settings 7-46 5-24 Back (Copy) 5-25 Copy 5-33 Background Color 5-34 Copy Density 5-21 Background Removal 5-28 Copy Insert Banner Printing Copy Program Lock Settings bizhub C652/C652DS/C552/C452 (Version 2) 14-7...
Page 330 Image Stabilization Setting Increase Priority 5-66 7-53 FAX Active Screen Initialize Fax Settings 7-47 Input Machine Address 7-32 7-28 5-26 Fax TX Settings Insert Image 5-25 Fax/Scan Insert Paper 6-12 5-25 Fax/Scan Settings Insert Sheet 14-8 bizhub C652/C652DS/C552/C452 (Version 2)
Page 331 5-29 Program Jobs No Matching Paper in Tray Setting Prohibited Functions When Authentication Error None 5-44 7-53 5-45 4-19 Non-Image Area Erase Proof Copy Non-Image Area Erase Operation Settings 7-13 Public User Access 4-10 7-35 bizhub C652/C652DS/C552/C452 (Version 2) 14-9...
Page 332 4-17 Service/Admin. Information 7-34 User Authentication/Account Track Set Range 5-37 5-63 User Box 5-34 Sharpness User Box Administrator Setting 7-50 5-23 Sheet/Cover/ Chapter Insert 7-27 User Box Settings Shift Output Each Job User Counter 7-39 14-10 bizhub C652/C652DS/C552/C452 (Version 2)
Page 333 Watermark Type Weekly Timer ON/OFF Settings Weekly Timer Setting When # of Jobs Reach Maximum 7-36 When AMS Direction is Incorrect Wide Paper 5-36 With Margin 5-36 Without Margin 5-17 Z-Folded Original Zoom 4-21 5-37 bizhub C652/C652DS/C552/C452 (Version 2) 14-11...
Page 334 Index by button 14.2 14-12 bizhub C652/C652DS/C552/C452 (Version 2)

This manual is also suitable for:

Bizhub c652ds Bizhub c452 Bizhub c552

Konica Minolta bizhub C652 User Manual

1 Introduction

2 Part Names and Their Functions

3 Using this Machine

4 Control Panel Keys

5 Copy Function

6 User Settings

7 Administrator Settings

8 Maintenance

9 Troubleshooting

10 Authentication Unit (Biometric Type)

11 Authentication Unit (IC Card Type)

12 Specifications

13 Appendix

14 Index

Quick Links

Troubleshooting

Related Manuals for Konica Minolta bizhub C652

Summary of Contents for Konica Minolta bizhub C652