Konica Minolta bizhub C652 User Manual page 52

4
11
Change the settings according to the port, and then click [OK].
% For LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
% You must discriminate between upper and lower case letters when entering it.
% For Port 9100, select "RAW", and then enter a RAW port number (initial setting: "9100") in the "Port
Number" box.
12
Click [Next].
13
Click [Finish].
"Add Printer Wizard" appears.
14
Click [Have Disk].
15
Click [Browse].
16
Select a desired printer driver folder in the DVD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers:
PCL driver, PS driver and fax driver
17
Click [OK].
The "Printers" list appears.
18
Click [Next].
19
Follow the instructions on the pages that follow.
% To use a network connection, perform a test print after the network settings have been configured.
20
Click [Finish].
% If the "Windows logo testing" or "Digital Signature" window appears, click [Continue] or [Yes].
21
After finishing the installation, make sure that the icon for the installed printer is displayed in the
"Printers and Faxes" window.
22
Remove the DVD-ROM from the DVD-ROM drive.
This completes the printer driver installation.
4-16
Windows XP/Server 2003
bizhub C652/C652DS/C552/C452 (Version 2)
4.2