Installing The Printer Driver When Connecting The Machine - Konica Minolta bizhub C652 User Manual

4.1 Windows Vista/7/Server 2008/Server 2008 R2

Installing the printer driver when connecting the machine

In Windows Vista/Server 2008, the printer driver can be installed after you connect this machine.
Reference
- In Windows 7/Server 2008 R2, a window for specifying an installation disk does not appear after the
machine is connected to the computer. Install the printer driver in advance and connect the driver as
described in the previous section.
1
Connect this machine to the computer using a USB cable, and then start the computer.
NOTICE
When starting up the computer, do not plug in or unplug the cable.
2
Turn on the main power of this machine.
The "Found New Hardware" dialog box appears.
% If the "Found New Hardware" dialog box does not appear, turn this machine off, then on again. In
this case, turn off this machine, and then wait approximately 10 seconds before turning it on again.
If you turn this machine on immediately after turning it off, it may not function correctly.
3
Click "Locate and install driver software (recommended)".
The dialog box requesting the disk (DVD-ROM) appears.
% If you do not have the disk (DVD-ROM), click "I don't have the disc, show me other options". On the
next page, select "Browse my computer for driver software (advanced)", and then specify a desired
printer driver folder.
% Select a folder according to the printer driver, operating system, and language to be used.
4
Insert the printer driver DVD-ROM for Windows into the DVD-ROM drive of the computer.
The information on the disk is searched for, and then the list of the software supported by this machine
appears.
5
Select a desired printer driver name, and then click "Next".
% Selectable printer drivers:
PCL driver, PS driver, XPS driver and fax driver
6
Follow the instructions on the pages that follow.
% If the "User Account Control" window appears, click "Continue".
7
When the installation completes, click "Close".
8
After finishing the installation, make sure that the icon for the installed printer is displayed in the
"Printers" window.
% If the "Windows Security" window for verifying the publisher appears, click "Install this driver
software anyway".
9
Remove the DVD-ROM from the DVD-ROM drive.
This completes the printer driver installation.
bizhub C652/C652DS/C552/C452 (Version 2)
4
4-13