Windows 2000; For Network Connection (Lpr/Port 9100); Settings For The Machine; Installing The Printer Driver Using The Add Printer Wizard - Konica Minolta bizhub C652 User Manual

4.3

Windows 2000

4.3 Windows 2000
4.3.1

For network connection (LPR/Port 9100)

To use LPR/Port 9100 printing, specify the port while installing the printer driver.

Settings for the machine

To use Port 9100 or LPR printing, you must configure the network settings for the machine in advance.
Items to be configured
IP address
RAW port number
LPD Setting
d
Reference
For details on the network settings for the machine, refer to the "User's Guide [Network Administrator]".

Installing the printer driver using the Add Printer Wizard

0 Installing the driver to Windows 2000-based computers requires the administrator authority.
1
Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
2
Press the [Start] key, and then select "Settings" - "Printers".
3
Double-click "Add Printer".
"Add Printer Wizard" starts.
4
Follow the instructions on the pages that follow.
5
On the window for specifying how the printer is attached, select "Local printer", and then click [Next].
% Clear the "Automatically detect and install my Plug and Play printer" check box.
The "Select a Printer Port" page appears.
6
Click "Create a new port", and then select "Standard TCP/IP Port" as the type of port.
7
Click [Next].
"Add Standard TCP/IP Printer Port Wizard" starts.
8
Click [Next].
9
In the "Printer Name or IP Address" box, enter the IP address for the machine, and then click [Next].
% If the "Additional Port Information Required" page appears, go to Step 10.
% If the "Finish" page appears, go to Step 13.
10
Select "Custom", and then click [Settings].
11
Change the settings according to the port, and then click [OK].
% For LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
% You must discriminate between upper and lower case letters when entering it.
% For Port 9100, select "RAW", and then enter a RAW port number (initial setting: "9100") in the "Port
Number" box.
12
Click [Next].
bizhub C652/C652DS/C552/C452 (Version 2)
Description
In "TCP/IP Setting" of the machine, specify the IP address.
To use Port 9100 printing:
In "TCP/IP Setting" for the machine, enable the RAW port number
(initial setting: "9100").
To use LPR printing:
In "LPD Setting" for the machine, enable LPD printing.
4
4-21