Selecting And Connecting A Printer (Os X 10.4/10.5/10.6); Configuring The Bonjour Settings - Konica Minolta bizhub C652 User Manual

5
5.1.2

Selecting and connecting a printer (OS X 10.4/10.5/10.6)

In OS X 10.4/10.5/10.6, the printer can be connected with Bonjour, LPR (LPD), or IPP.
In OS X 10.4/10.5, the printer can also be connected with AppleTalk.
After configuring the network setting for the machine, selecting this machine as the printer to be used in the
"Printers and Faxes" window enables printing.

Configuring the Bonjour settings

Configuring the Bonjour settings for the machine
Enable Bonjour in "Bonjour Setting" for the machine, and then enter the Bonjour name.
d
Reference
For details on the Bonjour settings for the machine, refer to the "User's Guide [Network Administrator]".
Adding a printer
1
In the "Apple" menu, select "System Preferences".
2
Click the [Print & Fax] icon.
3
Click [+] on the "Print & Fax" window.
4
Click [Default].
Connected printers are detected.
% If no printer is detected, turn your printer off then on again.
In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again.
If you turn the printer on immediately after turning it off, it may not function correctly.
5
From the "Printer Name" list, select the desired Bonjour-connected model name.
The printer driver corresponding to the selected printer name is automatically selected.
% To check the printer name, select [Network Settings] - [Bonjour Setting] in [Administrator Settings]
of this machine. In the default setting, the contents enclosed in parentheses ( ) suffixed in [Bonjour
Name] correspond to the low-order three bytes of the MAC address.
% After the printer driver is selected, go to Step 7.
% If an incorrect printer driver is selected, go to Step 6.
6
Select the desired printer driver manually.
% When OS X 10.6 is used, select "Select printer software..." from "Print Using:", and then select the
printer driver of the desired model name from the list that is displayed in another window.
% When OS X 10.5 is used, select the "Select a driver to use" from the "Print Using", and then select
the printer driver of the desired model name from the list.
% When OS X 10.4 is used, select "KONICA MINOLTA" from the "Print Using", and then select the
printer driver of the desired model name from the list.
7
Click [Add].
When the selected printer is registered in the "Print & Fax", the setting procedure is completed.
% If the "Installable Options" window appears, proceed to change the option settings as necessary.
For details, refer to page 9-5.
Reference
- For OS X 10.4, you can also add a printer by clicking [Add] in the "Printer Setup Utility" window.
5-4
Mac OS X 10.2/10.3/10.4/10.5/10.6
bizhub C652/C652DS/C552/C452 (Version 2)
5.1