1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. All in One Printer
  5. bizhub C652 Series
  6. Owner's manual and installation manual

Konica Minolta bizhub C652 Owner's Manual And Installation Manual

Hide thumbs Also See for bizhub C652:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
INSTALLATION MANUAL
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
I. Outline of installation procedures
AU-101
AU-102
WT-506
Machine
AU-201
KH-101
SP-501
*1
MK-715
Electronic system options
ZU-606
PK-516
JS-602
FS-526
SD-508
PI-505
When installing the machine and associated options as a system, follow the order shown on the upper.
Note:
• For the detailed installation procedures for each option, follow the instructions given in the corresponding
installation manual and perform the procedures correctly.
• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.
• When transporting the machine, assign an adequate number of persons to the job and follow the speci-
fied correct procedures.
(mass: approx. 221 kg (487-1/4 lb))
/
Applied Machines:
LU-204
✱ Electronic system options
*2
*1*2
LU-301
EK-604
EK-605
*2
UK-203
*2
VI-505
*2
IC-412
OT-503
*2
FK-502
MK-720
*2
SC-507
*1
: Varies depending on the applicable marketing area.
*2
: No particular order in installation procedures.
A0P0IXC089DA
A0P0-9951-14
II. Installation space (unit: mm (inch))
bizhub C652 + ZU-606 + FS-526 + LU-204
2554 (100-9/16)
/
1064
(41-7/8)
418
(16-7/16)
III. Pre-installation check items
1. Select a level and stable place for installing the
machine.
2. Be sure to use a power source of the voltage and
frequency indicated in the product specifications.
Ensure that the current carrying capacity of the
power outlet is at least equal to the current listed
in the product specifications.
3. Power the machine directly from a dedicated
power outlet. (Do not use an extension cord.)
4. Do not plug or unplug the power cord with wet or
dirty hands, otherwise you may get an electric
shock.
5. Avoid a hot and humid environment, or a place
exposed to direct sunlight.
6. Avoid a dusty location, or a place near volatile
and flammable substances.
7. Avoid a poorly ventilated place.
E-1
IV. Accessory parts
No.
1. User's guide holder
2. Quick guide
1252
238
(Copy/Fax/Scan/Box operations)
(49-5/16)
(9-3/8)
3. Installation manual
4. User's guide CD
5. CD-ROM
6. Tray label
7. Paper size label
8. Label (Legal restrictions on copying) *
9. Label (Super G3 label)
10. Chart
11. Cap A (black)
12. Cap B (white)
1575 (62-1/16)
13. Power cord *
14. Connector cover
1107
50
(43-9/16)
(2)
15. IR Cover
16. Mounting screw
17. Spacer A
18. Spacer B
19. Power cord instruction *
20. Panel pen
* Varies depending on the applicable marketing
area.
Note:
Keep the label (Super G3 label) at hand. It is nec-
essary for mounting the FAX Kit.
A0P0IXC090DA
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
Name
Q'ty
1
1
1 set
1
1 set
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1

Advertisement

Table of Contents
loading

Related Manuals for Konica Minolta bizhub C652

Summary of Contents for Konica Minolta bizhub C652

  • Page 1 II. Installation space (unit: mm (inch)) IV. Accessory parts bizhub C652 + ZU-606 + FS-526 + LU-204 INSTALLATION MANUAL Name Q’ty 1. User’s guide holder 2554 (100-9/16) 2. Quick guide Applied Machines: 1064 1252 (Copy/Fax/Scan/Box operations) (41-7/8) (49-5/16) (9-3/8) 3. Installation manual 1 set <Important>...

  • Page 2: Unpacking The Machine

    V. Unpacking the machine VI. Removing protective tape, packing and 3. Hold onto the handle of the machine and tilt the 6. Position the slope as illustrated and drive nails in machine to the right and left. Under this condition, to fix the slope in position.

  • Page 3: Installing The Toner Cartridge

    VII. Installing the toner cartridge 2. Remove the protective material. 5. Pull the tray 1 out and remove the protective tape 4. Insert the toner cartridge into the machine. from the tray. Note: Note: Make sure that the color is same between insert- Since cartridge is not furnished with the machine, ing port and the toner cartridge.
  • Page 4 XI. Connecting the power cord XII. Toner supply 2. Install the IR cover furnished with the machine 6. Set the panel pen in the pen holder at the control (one mounting screw furnished with the panel. 1. Connect the power cord. 1.
  • Page 5 × <If A3 or Ledger paper is set in step 1> 12. Touch “Copy”, select “A3 ”, and ½×11 <If A4 or Letter paper is set in step 1> 12. Touch “Copy”, select “A4 ”, and 6. Touch “Print”, select “A3 ×...

  • Page 6: Adjusting Skew Feed

    XV. Adjusting skew feed 7. Obtain the difference between the deviation of 10. When the difference of the deviation is - (minus), 10. Place the chart in the document feeding tray the chart and the deviation of the sample. turn the screw clockwise to adjust. (lengthwise).
  • Page 7 XVII. Non-image area erase check XXI. Unit change 21. Press the Start key. 5. Touch “Entry.” 22. Check that “Adjustment Result” is “OK” and then Note: 1. Make sure that the Service Mode screen is dis- Note: touch “SET.” Touching the Entry key returns the figures in the played.
  • Page 8 XXVI. Check through test print XXVIII. Network setting 4. Remove the end guide plate (two screws). 13. Touch “Tray 3” and select the paper size that was set for the tray 3. Make operation checks using “Setting Information Make the TCP/IP address setting for the network. 14.

This manual is also suitable for:

Bizhub c552

Table of Contents