Control Panel - Konica Minolta bizhub C652 User Manual

2.1 Printer controller
2.1.3

Control panel

The printer driver settings are mainly configured on the computer. However, printing the font list and
configuring the printer controller settings and default print settings are available using the control panel of
this machine.
The following describes the important keys used for the printer function.
No. Name
1 Touch panel
2 [Utility/Counter]
3 [Reset]
4 [Proof Copy]
5 [Start]
6 Data indicator
7 [C] (Clear)
8 Keypad
bizhub C652/C652DS/C552/C452 (Version 2)
Description
Various screens and messages are displayed.
Configure various settings by directly pressing the touch
panel.
Press this key to display the Utility screen and the Meter
Count screen.
Press this key to reset all settings (except programmed set-
tings) entered using the control panel or touch panel.
Press this key to perform proof printing when a proof print job
is stored.
Press this key to start the operation of the selected function.
When this machine is ready to begin the operation, the indi-
cator on the [Start] key lights up in blue. If the indicator on the
[Start] key lights up in orange, the operation cannot begin.
Flashes in blue while a print job or fax is being received.
Lights up in blue when a print job or fax is queued to be print-
ed or while it is being printed.
Press this key to erase a value entered using the keypad or
characters entered from the keyboard on the screen.
Press to enter numbers. Use the keypad to enter the admin-
istrator password or other setting values.
2
2-5