5
5.2.2
Sending with the advanced preview
The following describes the procedure after the original is loaded. For details on the general flow for sending
fax and scanned data, refer to page 5-3.
Sending with Advanced Preview
1
Load the original.
2
Specify the destination.
3
Press the [Proof Copy] key.
4
Select the original direction.
% On the original glass
% On the ADF
% If [Advanced Preview Setting] - [Original direction setting display] is set to [OFF] in Administrator
Settings, the screen for specifying the direction in which the original is loaded does not appear. For
details on [Original direction setting display], refer to page 10-12.
5-14
Using the advanced preview
bizhub C652/C652DS/C552/C452 (Version 3)
5.2