5.2
Using the advanced preview
5.2.2
Sending with the advanced preview
The following describes the procedure after the original is loaded. For details on the general flow for sending
fax and scanned data, refer to page 5-2.
Sending with Advanced Preview
1
Load the original.
2
Specify the destination.
3
Press the [Proof Copy] key.
4
Select the original direction.
% On the original glass
% On the ADF
% If [Advanced Preview Setting] - [Original direction setting display] is set to [OFF] in Administrator
Settings, the screen for specifying the direction in which the original is loaded does not appear. For
details on [Original direction setting display], refer to page 10-11.
5
Press the [Start] key.
The original is scanned, and the Preview screen appears.
bizhub C652/C652DS/C552/C552DS/C452
5
5-13