8
8.3.2
TX Result Report
The result of transmission is printed automatically. Select the print timing from ON, If TX Fails, or OFF in
Administrator Settings of the Utility menu.
8.3.3
Broadcast Report
Printed automatically when a sequential broadcast transmission is completed.
You can enable or disable this report to be printed in [Sequential TX Report] in the Utility menu. In addition,
you can specify the printing timing (All Destinations/Each Destination) in [Broadcast Result Report].
8.3.4
Job Settings List
Print the job settings list of this machine.
How to print
%
Select [Fax Settings] - [Job Settings List] in Administrator Settings, and configure the Paper Tray and
Simplex/Duplex settings, and then press [Start].
8-14
Reports/lists commonly used among G3/IP/I-FAX
bizhub C652/C652DS/C552/C452 (Version 3)
8.3