Contents Introduction System requirements ................ 1-1 Installing the TWAIN Driver Installation procedure ............... 2-1 To install the software ..............2-1 Uninstalling ..................2-1 Importing Images To import images ................3-1 Import procedure ................3-1 Scanning Using the PUSH Scan Function ........3-4 To scan using the PUSH Scan function .........
LICENSE ISSUES The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.
Page 6
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EX- PRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AU- THOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCI- DENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE...
Introduction Introduction System requirements In order to use this software, a TWAIN-compatible image-processing appli- cation must first be installed on the computer. - Operating system Windows 2000 Professional (SP4) Windows XP Home Edition (SP3) Windows XP Professional (SP3) Windows NT 4.0 (SP6a) Windows Vista Home Basic (SP1) Windows Vista Home Premium (SP1) Windows Vista Business (SP1)
Installing the TWAIN Driver Installing the TWAIN Driver Follow the procedure described below to install the TWAIN driver. The enclosed User Software CD-ROM is required to install the software. Installation procedure To install the software Turn the computer on and start Windows. Insert the User Software CD-ROM into the computer’s CD-ROM drive.
Importing Images Importing Images To import images Images can be imported from the image-processing application compatible with the TWAIN driver. Here, an example is given using Adobe Photoshop. Note If the multifunctional product is not set to allow scanner transmissions, it will not be possible to scan an image with the TWAIN driver.
Page 10
Importing Images – If user authentication or account track settings have been specified from the device, the corresponding authentication dialog box ap- pears. For details, refer to "With user authentication" on page 3-8 and "With account track" on page 3-10. –...
Page 11
Importing Images Click [Scan]. The document data appears in the main window of the software. TWAIN driver...
Importing Images Scanning Using the PUSH Scan Function With this method, scanning begins when the [Start] key in the control panel is pressed to scan the document. To scan using the PUSH Scan function Display the main window. – For details on displaying the main window, refer to "Import proce- dure"...
Page 13
Importing Images Load the document into the ADF or position it on the original glass. Press the [Start] key on the control panel. – If user authentication or some other authentication is specified, en- ter the user name and password also on the control panel of the machine before pressing the [Start] key.
Importing Images Scanning Using the Prescan Function If you wish to specify the scan area or adjust the image quality before actually scanning the document, do a prescan first. Reminder Position the document on the original glass. The ADF cannot be used. To scan using the Prescan function Display the main window.
Page 15
Importing Images Click [Prescan]. The document is scanned using coarse resolution, and the image is displayed in the window. Specify the scan settings. Click [Scan]. The document is scanned, and the image is displayed. TWAIN driver...
Importing Images With user authentication Before the main window appears, the User Authentication dialog box ap- pears. The user name and password specified for user authentication must be en- tered. For details, consult with the machine’s administrator. To perform the user authentication operation Select "Login as the Registered User".
Page 17
Importing Images – If external server authentication was selected for the user authenti- cation setting on the device and if multiple domains have been reg- istered, enter "@domain_name" after the user name. For example, "user01@domain" when the user name is "user01" and the domain name is "domain".
Importing Images With account track Before the main window appears, the Account Track Authentication dialog box appears. The account name and password specified for account tracking must be en- tered. For details, consult with the machine’s administrator. To perform the account track operation Enter the account name and password.
Importing Images Settings in the Main Window The following settings and operations are available from the main window. Item Description Save/Restore Setting Settings can be saved and loaded at a later time. Settings Set basic scan parameters. For details, refer to "Parame- ters on the Settings tab"...
Importing Images Parameters on the Settings tab The items that can be specified are as follows: Item Description Scan Size Select the paper size to be scanned. Resolution Set the resolution. Reminder If a document was scanned with a resolution of 100 dpi specified from the TWAIN driver, it will appear as 200 dpi in the control panel of the multifunctional prod- uct and in job list of the multifunctional product.
Page 21
Importing Images If you click [Other Settings], the additional items below can be specified. Item Description Compression Select the type of compression applied to the scanned data. Original Image Type Select the quality of the original such as text or photo. Background Adjust Adjust the background density.
Importing Images Parameters on the Image tab The items that can be specified are as follows: Item Description Full Enhancement Select this check box to automatically adjust all quality parameters on this tab. Adjust Contrast Select the contrast level. Remove Undercolor Select the level to which the background color is removed.
Importing Images Parameters on the Area tab An area can be specified only when the prescanned image is showing. The coordinates and position of the dotted line area that is currently in view can be verified or specified. Item Description Origin X Displays the X value of the origin.
Selecting the Scanning Device Selecting the Scanning Device Scanning devices on the network can be searched and selected. This is used when searching for devices for the first time on the network or when search- ing for newly added devices. To select a device Display the main window.
Page 25
Selecting the Scanning Device Select how the device is to be selected. Select either "from Search Re- sult" or "from Registered Devices". When "from Search Result" is selected, searching automatically starts. A list of selectable devices is displayed. TWAIN driver...
Page 26
Selecting the Scanning Device Click the name of a device to select it, and then click [Connect]. – To register the device when a connection is established, select the "Add this to the registered device list" check box. – If user authentication is enabled on the scanning device, enter the user name or password.
Registering a New Scanning Device Registering a New Scanning Device Devices that are currently connected can be registered to a list. This list elim- inates the hassle of having to search the network every time to make a con- nection. A maximum of 20 devices can be registered in the list.
Page 28
Registering a New Scanning Device Select "from Registered Devices". Click [Add]. The Destination Settings dialog box appears. TWAIN driver...
Page 29
Registering a New Scanning Device Type in the device information. – The items that are entered are as follows: In the "Name" box, type in the name of the device. In the "IP Address (Host Name)" box, type in the IP address or host name for the device.
Registering a New Scanning Device Checking Authentication Information Click [Login Information] in the Destination settings dialog box to display the specified authentication information. Item Description User Authentication Shows the user name and password specified for user authentication. The password appears as "xxxx". Account Track The department name and password for volume track are displayed.
Page 31
Copyright 2005 2008.10 All rights reserved.