Konica Minolta bizhub C652 User Manual page 36

3
No. Name
5 [Mode Memory]
6 [Utility/Counter]
7 [Reset]
8 [Interrupt]
9 [Stop]
10 [Proof Copy]
11 [Start]
12 Data indicator
13 [C] (Clear)
14 Keypad
15 [Guidance]
16 [Enlarge Display]
17 [Accessibility]
18 [Access]
19 [Brightness] dial
20 [User Box]
3-4
Description
Press to register (store) the desired copy/scan
settings as a program or to recall a registered
copy/scan program.
Press to display the Utility screen and the Meter
Count screen.
Press to clear all settings (except programmed
settings) entered using the control panel and
touch panel.
Press to enter Interrupt mode. While the machine
is in Interrupt mode, the indicator on the [Inter-
rupt] key lights up in green and the message
"Now in Interrupt mode." appears on the touch
panel. To cancel Interrupt mode, press the [Inter-
rupt] key again.
Pressing the [Stop] key during scanning tempo-
rarily stops the scan operation.
Press to print a single proof copy to be checked
before printing a large number of copies. You can
check the finishing state on the touch panel by
pressing this key before scanning or copying.
Press to start scanning. When this machine is
ready to begin a scan operation, the indicator on
the [Start] key lights up in blue. If the indicator on
the [Start] key lights up in orange, scan operation
cannot be started.
When a job is temporarily stopped, press this key
to restart the job.
Flashes in blue while a print job is being received.
Lights up in blue when data is being printed.
Press to erase a value (such as the number of
copies, a zoom ratio, or a size) entered using the
keypad.
Use to enter the number of copies to be pro-
duced,
Use to enter the zoom ratio.
Use to enter the various settings.
Press to display the Guidance screen. From this
screen, you can view descriptions of the various
functions and details of operations.
Press to enter Enlarge Display mode. If you use
PageScope Authentication Manager for authenti-
cation, the Enlarge Display screen is not availa-
ble.
Press to display the screen for configuring set-
tings for user accessibility functions.
If user authentication and account track settings
have been applied, press this key after entering
the user name and password (for user authentica-
tion) or the account name and password (for ac-
count track) in order to use this machine. Press
this key to log off from the machine as well.
Use to adjust the brightness of the touch panel.
Press to enter User Box mode.
While the machine is in User Box mode, the indi-
cator on the [User Box] key lights up in green. For
details, refer to the "User's Guide [Box Opera-
tions]".
bizhub C652/C652DS/C552/C452 (Version 3)
Control panel 3.1