10.4
Administrator Settings (G3)
The following screen is displayed if two units of fax kit FK-502 are installed, and [Individual Receiving Line
Setup] is set to [ON] in Administrator Settings.
Press [Yes] and then specify a password using the keypad. (up to eight characters)
The following items are not available if Memory RX Settings are configured.
-
PC-Fax RX Settings
-
TSI User Box Settings
-
Forward TX Setting
Reference
-
For details on printing documents stored in a Memory RX User Box, refer to the "User's Guide [Box
Operations]."
-
You can also specify the registered group as the destination.
Closed Network RX
Specify whether to use the Closed Network RX function. To use the function, specify a password that is used
for Closed Network RX.
Press [No] to clear the entered setting and then specify a password using the keypad. (up to 4 digits)
Reference
-
Closed Network RX is only available when the receiver has password transmission function.
bizhub C652/C652DS/C552/C452 (Version 3)
10
10-25