Field Service Ver. 1.0 Jul. 2006
8.9
REPORTING
8.9.1
ACTIVITY REPORT
Function
• Every 60 transmissions/receptions, a report can be printed to show the results of the
transmissions/receptions. This function can be used to set whether the report is printed
Use
automatically when the 60th transmission/ reception is reached.
• The default setting is "ON".
Setting/
procedure
8.9.2
TX RESULT REPORT
Function
• This function can be used to set whether the report showing the result of a transmission
is printed automatically after the transmission is finished.
Use
• The default setting is "ON (ERROR)".
Setting/
procedure
ON: Prints the report after each transmission.
ON (ERROR): Prints the report after a transmission only if an error occurred.
OFF: Does not print the report after each transmission, even if an error has occurred.
8.9.3
RX RESULT REPORT
Function
• This function can be used to set whether the report showing the result of a reception is
printed automatically after mailbox reception is finished.
(If regular reception is not finished normally, a report will always be printed, regardless
Use
of the selected setting.)
• The default setting is "ON (ERROR)".
Setting/
procedure
ON: Prints the report after each reception.
ON (ERROR): Prints the report after a reception only if an error occurred.
OFF: Does not print the report after each reception, even if an error has occurred.
"ON"
OFF
ON
"ON (ERROR)"
ON
"ON (ERROR)"
8. Menu mode
OFF
OFF
95