Table of Contents
Advertisement
Service Interval Display
First read and observe the introductory information and safety warn-
ings
on page 13.
If a service due date, then the following information is displayed for about 10 sec-
onds.
›
Icon and the days remaining until the next service interval
›
Icon and the days remaining until the next service interval
The kilometre indicator or the days indicator reduces in steps of 100 km or, where
applicable, days until the service due date is reached.
As soon as the due date for the service is reached, the flashing key symbol and
the text appears in the display for about 20 seconds after the ignition has
been switched on.
Display the days and distance until the next service interval
You can press button
» fig. 2
on page 7 continuously to display the remaining
5
distance and days until the next service interval whenever the ignition is switch-
ed on.
Notice
Information is retained in the Service Interval Display even after the vehicle bat-
■
tery is disconnected.
If the instrument cluster is exchanged after a repair, the correct values must be
■
entered in the counter for the Service Interval Display. This work is carried out by
a specialist garage.
For more information on the service intervals
■
ice intervals.
Multifunction display (MFA)
Introduction
This chapter contains information on the following subjects:
Operation
Memory
Information overview
Warning against excessive speeds
14
Usage
»
service schedule, chapter serv-
14
15
15
16
The driving data is displayed on the multifunction display.
The multifunction display can only be operated when the ignition is switched on.
After the ignition is switched on, the function that was last selected before
switching off the ignition is displayed.
WARNING
Concentrate fully at all times on your driving! As the driver you are fully re-
■
sponsible for the operation of your vehicle.
Even at temperatures of around +4 °C, black ice may still be on the road sur-
■
face! You should therefore not only rely on the outside temperature display
for accurate information as to whether there is ice on the road.
Operation
First read and observe the introductory information and safety warn-
ings
on page 14.
The multi-function display can be operated with the buttons on the control lev-
er
» fig. 5
.
Description of the operation
Button
Action
push up or down briefly
A
press briefly
B
Fig. 5
Buttons on the control lever
Operation
Select data / set data values
Show indication / confirm information
Advertisement
Chapters
Table of Contents
