Table of Contents
Advertisement
As soon as the due date for the service is reached, a flashing key symbol and
the text INSPEC_ appears in the display for around 20 seconds after the ignition
has been switched on.
The following is displayed in the information display:
Inspection now!
Displaying the distance and days until the next service interval
You can use the button
to display the remaining distance and days until the
5
next service interval
» Fig. 2
on page 8.
A key symbol and the remaining distance appear in the display for 10 seconds.
At the same time, the days remaining until the next service interval are displayed.
In vehicles equipped with the information display, you can call up this display in
the Settings menu
» page
15.
The following will appear together in the information display for about 10 sec-
onds:
Oil change ... km / ... days
Inspection ... km / ... days
Note
Information is retained in the Service Interval Display even after the vehicle bat-
■
tery is disconnected.
If the instrument cluster is exchanged after a repair, the correct values must be
■
entered in the counter for the Service Interval Display. This work is carried out by
a specialist garage.
For more information on the service intervals, see
■
ter service intervals.
Digital clock
First read and observe the introductory information and safety warn-
ings
on page 8.
The clock is set with the buttons
5
Select the display that you wish to change with the button
change with the button
.
6
It is also possible to set the clock in the Time menu on vehicles that are fitted
with the information display
» page
»
service schedule, chap-
and
» Fig. 2
on page 8.
6
and carry out the
5
15.
Recommended gear
First read and observe the introductory information and safety warn-
ings
on page 8.
The currently engaged gear
A
In order to minimise the fuel consumption, a recommendation for shifting into an-
other gear is indicated in the display.
If the control unit recognises that it is beneficial to change gear, an arrow
shown in the display. The arrow points up or down, depending on whether you
should shift into a higher or lower gear.
On vehicles with manual transmission the recommended gear is displayed imme-
diately instead of the gear selected
CAUTION
The driver is always responsible for selecting the correct gear in different driving
situations, such as overtaking.
Multifunction display (onboard computer)
Introduction
This chapter contains information on the following subjects:
Memory
Operation
Fig. 4
Recommended gear
is shown in the instrument cluster display
.
A
Instruments and Indicator Lights
» Fig.
4.
B
is
12
13
11
Advertisement
Chapters
Table of Contents
