17.2. Chairman Unit TS-801, Delegate Unit TS-802
Power Source
Current Consumption
Wavelength
Modulation Method
Carrier Frequency
Acceptance Angle
Emission Angle
Input
Output
LED Indicator
Battery Life
Operating Temperature
Finish
Dimensions
Weight
Note: The design and specifications are subject to change without notice for improvement.
17.3. Microphone (standard) TS-903, Microphone (long) TS-904
Model No.
Type
Directivity
Rated Impedance
Rated Sensitivity
LED Indicator
Frequency Response
Output Connector
Finish
Length
Weight
Applicable Unit (Option)
Note: The design and specifications are subject to change without notice for improvement.
56
7.4 V DC (battery), 9 V DC (AC adapter)
(supplied from BP-900 battery or AD-0910 AC adapter)
Max. 270 mA
870 nm (AM: Brightness modulation)
Frequency modulation
Transmission: Audio channel 1: 7.35 MHz
Audio channel 2: 8.10 MHz
Audio channel 3: 8.55 MHz
Audio channel 4: 9.15 MHz
Control channel: 6.45 MHz
Reception:
Audio channel:
Vertical: 90°, Horizontal: 120°
Vertical: 90°, Horizontal: 120°
Microphone terminal: XLR-4-31 type
(For connecting the optional TS-903 or TS-904)
Monitor speaker: 8 Ω, 0.2 W
Headphone:
Mini jack x 2
Speech indicator (flashes when the unit is out of communications range),
Power indicator (flashes when the unit is out of communications range or
when the battery level is low)
Approx. 10 hours (when the fully-charged BP-900 battery is used with
"During speech" to "Standby" ratio of 1:2)
0°C to 40°C
Top Panel: ABS resin, gray metallic, paint, semi-gloss
210 (w) x 65.9 (h) x 152 (d) mm
630 g
TS-903
Speech (lighting) / low battery (flashing) indicator (ring type)
Gooseneck: Stainless steel, black
Other:
368 mm
90 g
Chairman unit: TS-801, Delegate unit: TS-802
1.95 MHz
Electret condenser microphone
Unidirectional
1.8 kΩ
–37 dB (1 kHz, 0 dB = 1 V/Pa)
100 – 13,000 Hz
XLR-4-32 type
ABS resin, black
TS-904
518 mm
105 g