[Bottom]
Remove the cover on the bottom side of the unit to expose its setting switches.
Note
The label describing the setting switches is shown
in the following figure.
9
8. Lithium-ion battery compartment
Install only a dedicated BP-900 Lithium-Ion
Battery in this compartment.
16
10
UNIT ID
1
9. Unit address number setting switch
Set the unit address number ([01] – [64]), taking
care to ensure that the same number is not
duplicated in the system.
If the number [00] is assigned to a unit, the user of
that unit cannot speak. However, the unit can be
used for monitoring.
Note
This number is factory-preset to [00].
8