Toa TS-800 Series Operating Instructions Manual page 11

[Bottom]
DC24V 3A(MAX)
SHORT
25 24
16. DC input
Connect the supplied AC adapter to this terminal.
17. AUX input terminal
Connect a CD player, tape recorder, or other
similar equipment to this terminal.
18. MIC input terminal
Connect a wired microphone to this terminal.
19. External control terminal
Connect this terminal to the serial port of a PC,
operation panel, or other external control
equipment.
20. Marking plate
Shows the Manufacturer's Name, Model Name,
and Electrical Rating.
21. Recording output terminal
Connect an Alternate Recording Deck or MD
recorder. An amplifier can also be connected for
public address applications.
22. Priority chime volume control
Adjusts the output volume of the chime tone that
sounds when the Priority Speech key on the
Chairman unit is pressed.
16 17
AUX
INFRARED TRANSMITTER/RECEIVER
23
18 19
MIC EXT CONTROL
23. Infrared transmitter/receiver unit I/O terminals
Connect the Infrared Transmitter/Receiver unit or
distributor to this terminal. By using the YW-1022
(2-branch distributor) and/or YW-1024 (4-branch
distributor), the following maximum number of
Infrared Transmitter/Receiver units can be
connected: 16 units when they are all TS-905
units, 12 units when they are all TS-907 units.
(Also 12 units when both models are mixed.)
24. Short circuit indicator
Lights when the Infrared Transmitter/Receiver
unit or its connected cable is shorted.
25. Cable clip
Run the AC adapter cable through this clip to
prevent its plug from being removed from the DC
input.
Cable clip
20 21 22
CHIME
REC OUT
To the DC input
AC adapter cable
11