Backup Mode 1 Select - Comtech EF Data Radyne RCS20 Installation And Operation Manual

M:n redundancy switch
Hide thumbs Also See for Radyne RCS20:
Table of Contents

Advertisement

RCS20 M:N Redundancy Switch
User Interfaces
4.3.1.5.1

BACKUP MODE 1 SELECT

This screen allows the user to select the mode of backup operation for Backup Channel 1
(Channel 0). The following backup modes are available:
Manual - allows the operator to force backups to occur even if prime channel
modems have not failed.
Non-Revertive - allows automatic backups to occur when prime channels fail, but
once a channel is backed up, it will remain backed up until manually reset by the
operator.
Revertive - allows automatic backups to occur when prime channels fail, and after a
channel is backed up, if the prime channel clears its error, the backup can become
available for another prime channel.
Programming steps:
1. Press <MANUAL> to configure Backup Channel 1 for manual operation. The switch
parameter table will be updated immediately.
2. Press <NON-REV> to configure Backup Channel 1 for automatic non-revertive operation.
The switch parameter table will be updated immediately.
3. Press <REVERT> to configure Backup Channel 1 for automatic revertive operation. The
switch parameter table will be updated immediately.
4. Press <CLR> or <RETURN> to abort programming (no switch parameters will be changed).
The display will return to Config Switch Screen 4 (Backup Mode Configuration).
Key
Label
S1
MANUAL
S2
NON-REV
S3
REVERT
S4
RETURN
Numeric
Keypad
<BACKUP> MODE CONFIGURATION
BACKUP 1 <BACKUP> MODE:
<MANUAL>
Function
Sets the backup unit for Manual Backup Mode. The switch parameter
table will be updated immediately.
Sets the backup unit for Non-Revertive Backup Mode. The switch
parameter table will be updated immediately.
Sets the backup unit for Revertive Backup Mode. The switch parameter
table will be updated immediately.
Pressed to return to the Backup Mode Configuration Screen.
Press <CLR> or <RETURN> to abort programming (no switch
---
parameters will be changed). Returns to the Backup Mode Configuration
Screen.
MANUAL
<NON-REV>
<REVERT>
<RETURN>
4–14
Rev. 14
MN-RCS20

Advertisement

Table of Contents
loading

Table of Contents