Omron BN75R Instruction Manual page 45

4
. UPS functions
Setting
Identification
Log
33
Menu
BSsignal ValidRange ☆
Dry Contact
BSsignal Delay Time
BUsignal Delay Time
Dry Contact Logic
Remote ON/OFF Logic ☆
Type
Serial Number
Firmware Ver.sion
Memorandum
Fault Log
Shutdown Log
AC input Log
Reset All Log Data
Description
Set the status for receiving the BS
signal.
Set the delay time for the BS signal.
Set the delay time for the BU signal.
Set the logic of each contact signal.
Set the logic of the remote signal.
Display the names of the UPS and
battery pack.
Display the serial number of the UPS.
Display the firmware version of the
UPS.
You can record information of 20
alphanumeric characters.
Display up to 10 fault log records (time
of occurrence and details of each
failure).
Display up to 10 reasons for shutdown
of the UPS.
Display up to 10 event log records.
Clear each log.