Freezing The Live Monitoring Image; Zooming In On The Live Monitoring Image; Figure 4-2 Mouse Menu - Honeywell HRSD40F User Manual

Operation
2.
Multi-View Displays
Press QUAD/SEQUENCE on the front of the DVR to toggle between quad (2x2) display
mode and sequence mode.

Freezing the Live Monitoring Image

Press
again. The screen displays

Zooming in on the Live Monitoring Image

Front panel or remote control
Enlarge an area of the video by pressing
Press
A rectangle shows the area that will be enlarged.You can move the rectangle around
using the arrow buttons. Pressing
rectangle. Exit the Zoom mode by pressing
displays if Zoom is selected in the Display setup screen (OSD tab).
Mouse
1.
2.
3.
Document 800-03097 Rev C
03/09
Figure 4-2
Select Display, then Camera, and then choose the camera from the list.
in the Live Monitoring mode to freeze the current image until you press
. For a few seconds after pressing
Right-click the mouse during live monitoring to open the mouse menu (see
Figure 4-2).
Select Zoom from the menu. A rectangle appears over the live monitor image.
Move the zoomed area, as defined by the rectangle, by either:
Mouse Menu
when the DVR is in Freeze mode.
, the Zoom button.
while in the Zoom mode enlarges the area in the
, a rectangle displays on the screen.
. While in the Zoom mode, the icon
107