2.
3.
4.
68
Figure 3-34
Note
You will be able to set up PTZ devices only if the PTZ port is set
to RS232 or RS485.
Select in the Product column the number of the camera you want to configure,
and press
. A list of PTZ devices appears.
Figure 3-35
Select your camera from the list and press
to the RS232 or RS485 connector on the back of the DVR following the camera
manufacturer's instructions.
Assign an ID number to your camera.
a.
Highlight the box under the ID heading and press
b.
Change the number by highlighting it and using the Up and Down arrow
buttons to increase and decrease the number. The PTZ ID number can be set
from 0 to 256.
PTZ Device List
List of PTZ Devices
HRSD40F DVR User Guide
. You need to connect the camera
.