Figure 3-12 Date/Time Setup Screen - Honeywell HRSD40F User Manual

Configuration
Changing the Date
1.
2.
3.
Formatting the Date
1.
2.
Changing the Time
1.
2.
3.
Formatting the Time
1.
2.
Document 800-03097 Rev C
03/09
Figure 3-12
Highlight the first field beside Date/Time in the Date/Time setup screen and press
. The individual sections of the date highlight.
Adjust the date using the Up and Down arrows.
Press when you have the correct date.
Highlight the Date Format box, then click
Select the date format from the three available formats: YYYY/MM/DD,
MM/DD/YYYY, DD/MM/YYYY; then click
Highlight the field beside Time in the Date/Time setup screen and press the
button. The individual sections of the time highlight.
Adjust the numbers using the arrow buttons.
Press when you have the correct time.
Highlight the Time Format box, then click
Select the time format from the three available formats: HH:MM:SS (based on a
24-hour clock), HH:MM:SS AM/PM (based on a 12-hour clock), PM/AM
HH:MM:SS (based on a 12-hour clock); then click
Date/Time Setup Screen
.
to save your selection.
.
to save your selection.
47