Configuring For Remote Control; Configuring Recording Settings; Figure 3-42 Remote Control Setup Screen - Honeywell HRSD40F User Manual

Configuring for Remote Control

The Remote Control setup screen allows you to select a port and make correct settings
for a remote keyboard.
1.
2.
3.
4.
5.

Configuring Recording Settings

Your DVR offers a variety of flexible recording modes. You can set it to:
•
•
•
•
74
Highlight Remote Control in the Devices menu and press
Control setup screen appears.
Figure 3-42
Highlight the field beside Port and select between None, RS232, and RS485. If
the RS232 port and RS485 port is in use for PTZ control, networking, or text input,
then the remote keyboard cannot be configured.
Highlight Setup... and select the correct Baud Rate, Parity, Data Bits, and Stop
Bits for the device you are connecting to the DVR.
Highlight the box beside Remote Control Product and select your device from
the list.
Save your Remote Control settings by highlighting Save and pressing
Select Cancel to exit the screen without saving the changes.
Record all the time
Record only events
Continue recording after the hard disk drive is full by recording over the oldest
video
Alert you and stop recording when the hard disk is full
Remote Control Setup Screen
HRSD40F DVR User Guide
. The Remote
.