Figure 3-69 Storage Screen - Honeywell HRSD40F User Manual

2.
3.
4.
5.
6.
Configuring the DVR to React to System Events
System events can activate the Alarm-Out connector, sound the DVR's internal buzzer,
and/or notify a number of different devices.
1.
100
Figure 3-69
Highlight the field beside Disk Bad Notify, then press
level of bad disk sectors at which you want the DVR to trigger an alert. The
available percentage levels range from 10% to 90%.
Highlight the field beside Disk Almost Full Notify, then press
percentage level of disk usage at which you want the DVR to trigger an alert. The
available percentage levels range from 80% to 99%.
Highlight the first field beside Disk S.M.A.R.T., and press
Down arrow buttons to scroll through the numbers. Refer to the hard disk drive
manufacturer's documentation for the correct temperature setting. If the
temperature of the hard disk drive exceeds the defined threshold, the system
triggers an alert.
Highlight the second field beside Disk S.M.A.R.T., and press
ºC (Celsius) or ºF (Fahrenheit), and press
Select Save, and press
screen without saving the changes.
Highlight the Actions tab and the System Event Actions screen displays.
Storage Screen
to accept the changes. Select Cancel to exit the
HRSD40F DVR User Guide
. Select the percentage
Select the
. Use the Up and
. Select either
.