Table of Contents
Advertisement
Troubleshooting
Troubleshooting
Document 800-03097 Rev C
03/09
Problem
No Power
No Live Video
No Live Video on the VGA
Monitor
DVR has stopped recording
The icon
displays,
however, the DVR is not
recording.
Possible Solution
•
Check power cord connections
•
Confirm that there is power at the outlet
•
Check camera video cable and
connections
•
Check monitor video cable and
connections
•
Confirm that the camera has power
•
Check camera lens settings
•
Check CVBS/VGA switch settings
If the DVR does not detect a VGA monitor
automatically, press and hold the PANIC
button (
)on the front panel or remote
control for 5 seconds or longer to switch the
video output from Video out to VGA out.
If the hard disk drive is full, you need to either
delete video or set the DVR to the Overwrite
Mode.
When the DVR is in the Pre-Event recording
mode, the yellow
there is no event, and the DVR is not
recording. The red
any event occurs and the DVR starts
recording.
E
and
display when
and
display when
151
Advertisement
Table of Contents
