Table of Contents
Advertisement
Configuration
6.
7.
Configuring for Video Loss
You can configure the DVR to detect and react to video loss. The DVR checks to see if
anything is obscuring the camera. Then, the DVR can be set to react to video loss
differently for each camera. Each camera can:
•
•
•
•
•
Set the Sensitivity for Checking Camera Obscuration
1.
Document 800-03097 Rev C
03/09
Note
For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RAS (Remote Administration System).
Highlight a field under the PTZ heading, and press
appears. Select the preset position for each PTZ camera, where you want PTZ
cameras to move to whenever the DVR detects motion on the selected camera's
input.
Save your Motion Detection changes by highlighting Save and pressing
Select Cancel to exit the screen without saving the changes.
Be associated with another camera
Trigger an Alarm-Out connector
Sound the DVR's internal buzzer
Notify a number of different devices
And/or move PTZ cameras to preset positions
Highlight Video Loss in the Event menu and press
screen appears.
. A list of PTZ presets
. The Video Loss setup
.
89
Advertisement
Table of Contents
