Setting Up The Dvr Storage; Figure 3-15 Storage Setup Screen; Table 3-4 Storage Screen Setup Fields - Honeywell HRSD40F User Manual

6.

Setting Up the DVR Storage

Highlight Storage in the System menu and press
appears. It displays information about the storage devices.
Field
Capacity
Disk Bad
Temperature
S.M.A.R.T.
50
Save your changes by highlighting Save and pressing
the screen without saving the changes.
Figure 3-15
Information
The Capacity field displays the capacity of the storage device.
The Disk Bad field displays the percentage of bad sectors on the
storage device.
Not Formatted indicates that the device is not formatted.
The Temperature field displays the temperature of the storage
device.
The S.M.A.R.T. field displays the condition of the storage device.
S.M.A.R.T. means Self-Monitoring Analysis and Reporting
Technology.
Good means that the storage conditions are normal.
Bad means that data cannot be written on or read from the storage
device.
N/A means that storage conditions are normal, but that
S.M.A.R.T. monitoring is not working or not supported.
Storage Setup Screen
Table 3-4 Storage Screen Setup Fields
HRSD40F DVR User Guide
. Select Cancel to exit
. The Storage setup screen