Figure 3-18 New User Window - Honeywell HRSD40F User Manual

Configuration
Changing Authority Levels for a Group
Highlight the Group Name in the Group & User column, then press
Adding a User
1.
2.
3.
4.
5.
6.
Document 800-03097 Rev C
03/09
Table 3-5 Group Authority Levels
Authority Level
Covert Camera View
System Check
Record Setup
Search
Clip-Copy
Select + User, then press
Figure 3-18
Click on the Group Name field, then use the virtual keyboard to enter the Group
name. Click OK when you have finished entering the Group Name. You can use
up to 15 characters.
Select a Group for the User.
Assign a password by either using the camera buttons (1-4) on the DVR front
panel or the infrared remote control, or by selecting ... and pressing
activate the virtual keyboard. The password can be up to eight digits.
Confirm the password in the same way that you assigned the password in
Select OK and press
Function
The user can view video from cameras set as
Covert while in the Live Monitoring or Search mode
on a local system or a PC running RAS.
The user can view the remote system status or
check the remote system status as a batch process
on a PC running RAS.
The user can establish all Record settings on a
local system or a PC running RAS.
The user can access the Search mode on a local
system or a PC running RAS.
The user can copy video clips on a local system or
a PC running RAS, and save video data in an AVI,
bitmap or JPEG file format.
. The New User window appears.
New User Window
to save this new User.
.
to
step 4.
53