Adjustment 4.0 Adjustment - Oki 18 Service Manual

Page: 60
Service Guide OKIPAGE 18/18n
Chapter 4 Adjustment
4.0 Adjustment
This chapter explains the adjustment necessary when replacing a part. Adjustment is made by changing a parameter
value set in EEPROM on the controller PCB. The parameters are set with key presses from the operator panel. This
printer has three maintenance modes used to reset page counts when replacing a part, fine tune, troubleshoot and
diagnose.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)