Adjust And Calibrate The Printer; Before Adjustment And Calibration - Oki IP-7900-21 Advanced Operation Manual

Adjust and calibrate the Printer

Before adjustment and calibration

Before adjustment and calibration, perform the operation below.
(1) Forcedly set the media heater to ON to warm up the Printer for 30 minutes or more.
Start the adjustment only after confirming that the Printer is warmed up sufficiently. The adjustment may not
be performed correctly when the Printer is not warmed up sufficiently.
(2) Rotate the control pressure knob to "OPEN" and reinstall the media to adjust the print head height.
84
IP-7900-20/21/7700-20/21 Advanced Operation Guide