Table of Contents
Advertisement
Page: 39
Service Guide OKIPAGE 18/18n
Chapter 3 Parts Replacement
3.3.10 Feeder Unit - Front
(1)
(1) Open the manual feed assy
and release both right and left parts by pulling out the engagements on the lower
part.
(1)
(2) Stand the manual feed assy
on end and unhook the engagements with both right and left manual feed hopper
stays.
(3) Remove the OP panel assy. [See 3.3.4]
(3)
(4) Unscrew 5 screws (2) and remove the feeder unit-front
.
Advertisement
Table of Contents
Troubleshooting
