Bracket Sub Roller - Oki 18 Service Manual

Page: 167
Service Guide OKIPAGE 18/18n
Chapter D Second / Third Paper Feeder Maint (option)

3.3.9 Bracket sub roller

(1) Remove the Roller assy hopping and Roller assy feed. (See section 3.3.1).
(2) Remove the Roller feed (See section 3.3.8)
(3) Unscrew a screw (1) to remove the Bracket joint (2) , Spring joint (3) and Gear joint (4).
(4) Take away the E-ring (5) to remove the Gear hopping (6).
(5) Disengage latchs to remove the Gear hopping (2nd) (7). (At this time, the Bracket planet assy (8) can be
removed simultaneously.)
(6) Take away two E-ring (9) and pull out the Knock pin (10) to remove the Gear Z38 (11).
(7) Remove two ADF bearing (12) , Spring release (13) , Bearing F (14) and Space hopping shaft (15) and remove
the Shaft hopping (16) , Guide roller (17) , Lever release assy (18) and Bracket sub roller (19).
(8) Take away the Gear planet (z28) (20) to remove the Planet plate (21).
(9) Take away the Bracket spring (sub) (22) to remove the Spring sub (23).