How To Change Parts - Oki 18 Service Manual

Page: 29
Service Guide OKIPAGE 18/18n
Chapter 3 Parts Replacement

3.3 How to Change Parts

This section explains how to change parts and assemblies appearing in the disassembly diagram below.
3.3.1 Faceup Stacker Assy
3.3.2 Contact Assy
3.3.3 DC Fan Motor
3.3.4 OP Panel Assy
3.3.5 Board-FFF
3.3.6 Stacker Assy, Damper Arm, Cover Rear
3.3.7 Sensor Stacker Full
3.3.8 Cable cover (guide film)
3.3.9 Damper
3.3.10 Feeder Unit - Front
3.3.11 Roller Assy - Regist
3.3.12 Motor - Main
3.3.13 Guide Assy - Eject
3.3.14 Heat Assy
3.3.15 Roller feed (C)
3.3.16 Roller Assy - BK
3.3.17 Roller Assy - Feed
3.3.18 LED Head
3.3.19 Paper cassette, ROLLER Assy - Feed, ROLLER - Assy, Hopping
3.3.20 Frame Assy - Separation
3.3.21 Transfer Roller / TR Gear / TR Bearing
3.3.22 EP lock shaft
3.3.23 LEVER Assy - Out Sensor
3.3.24 Toner sensor lever
3.3.25 Paper sensor lever
3.3.26 Inlet sensor lever
3.3.27 Power supply unit
3.3.28 Lever - Paper end & Lever - Paper near end