Motor - Main - Oki 18 Service Manual

Page: 41
Service Guide OKIPAGE 18/18n
Chapter 3 Parts Replacement

3.3.12 Motor - Main

(1) Remove the stacker assy. [See 3.3.6]
(2) Remove the feeder unit-front. [See 3.3.10] (At this point, the manual feed assy does not have to be removed.)
(3) Remove the DC fan motor. [See 3.3.3]
(4) Remove the contact assy. [See 3.3.2]
(5) Remove the plate-FG (F) (1).
(2) (3)
(6) Remove the TR gear and roller transfer . (Use Holder-TR Eject (16) for the removal.)
(5)
(7) Unscrew 7 screws (4) and remove the main frame .
(8) Unlock latches at two points of the lever back up release 6 and pull it out in right direction.
(8)
(9) Unhook the EP lock spring (7) and remove the EP lock lever .
(11)
(10) Take off the E ring (9) and remove the plate-FG (1st ) (10) and gear assy-clutch .
(12) (13)
(11) Unlock 2 latches to remove the motor assy-main and idle gear .
(15)
(12) Unscrew 2 screws (14) and remove the motor -main .