Adjustment; Adjustment Types And Functions; Status Monitor; Maintenance Utility - Oki B4100 Maintenance Manual

3.

ADJUSTMENT

This chapter explains adjustment necessary when a part is replaced.
This adjustment is made by changing the parameter values set in EEPROM on the main control board.
The status monitor or maintenance utility can be used to change these values.
Only servicemen and maintenance personnel can use the maintenance utility. This utility cannot be
made public for printer end users.
3.1

Adjustment Types and Functions

3.1.1

Status Monitor

Please refer to Status Monitor.
3.1.2

Maintenance Utility

A operation method of Maintenance Utility, please refer to Maintenance Utility Operating
Specifications.
3.2

Adjustment When Replacing a Part

Adjustment is necessary when replacing any of the following parts.
Part Replaced
Image Drum Cartridge
Main Control Board
3.2.1

Uploading/Downloading EEPROM data

When the controller printed circuit board is replaced, the contents of the old EEPROM shall be copied
to the new EEPROM on the new board to preserve customer settings. For the purpose, use the
Maintenance Utility.
A operation method of Maintenance Utility, please refer to Maintenance Utility Operating Specifications.
The maintenance utility is designed to be used only by field engineer and it should not be released to
the end-users.
42640901TH Rev.1
Adjustment
Reset the image drum counter
(refer to User's manual).
EEPROM data Upload / Download
Oki Data CONFIDENTIAL
41 /