Lcd Status Message List - Oki 18 Service Manual

4.3.1 LCD Status Message List

The listing of the statuses and problems displayed in the form of messages on the LCD is provided in Table 4-1.
Classification LCD Status Message
Jam Error
Jam Error
Jam Error
Jam Error
Jam Error
Interface Timeout
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIPAGE 18/18n
Chapter C Duplex Unit Maintenance (option)
Description
Informs that a jam occurs in
retracting papers into the
reverse roller within the duplex
Unit.
Informs that a jam occurs in
retracting papers into the
reverse roller within the Duplex
Unit.
Informs that a jam occurs in
reversing papers in the reverse
roller within the Duplex Unit.
Informs that a jam occurs in
impinge-feeding papers within
the Duplex Unit.
Informs that the 1st tray is pulled
out in paper-remaining state
when feeding papers within the
Duplex.
Informs that an I/F time-out
occurs between the printer and
Duplex.
Page: 142
Recover Method
Remove all the papers from the
inside of printer unit and Duplex
unit and close the cover.
Remove all the paper from the
inside of printer unit and Duplex
unit and close the cover.
Remove all the papers from the
inside of printer unit and Duplex
unit and close the cover.
Remove all the papers from the
inside of printer unit and Duplex
unit and close the cover.
Remove all papers from the
inside of printer unit and Duplex
unit and close the cover.
- Verify connection of LEX-PCB
and square-shaped connector.
Replace the square-shaped
connector if necessary.
- Replace LEX-PCB.