Help - BT Diverse 4016 Micro User Manual

Diverse 4016 Micro ~ 3rd Edition ~ 12th Octoberr 2001 ~ 3667

Help

Try these solutions to the most common problems.
Problem
Handset not registering.
You have forgotten your base
unit PIN number.
No display
Nothing happens when you
press any button.
No connection between
handset and base unit.
Handset does not charge.
Possible cause
The base is not powered.
There is no battery in the handset.
You have changed the PIN.
The handset is switched off.
Keyguard may be switched on.
Are you out of range of the
base unit.
Handset is not registered.
Base unit is not switched on.
Is another handset using the
line for a long time?
Is the handset placed on the
charger properly?
Is the battery fitted correctly?
Solution
Make sure that the power supply
is plugged in and switched on at
the base and the charger.
Make sure the rechargeable
battery is fitted correctly in
the handset.
Switch the handset off and then
back on again and try
re- registering it.
Try entering the default PIN (0000).
If you have changed the PIN and
cannot remember it, contact the BT
Diverse Helpline on 08457 908070.
Hold down the RED PHONE button
for 1 second.
Charge or replace the battery.
#
Hold down the button for
1 second.
Move closer to the base unit.
Register the handset.
Check the mains power is
connected correctly.
Maximum charging power is only
possible when no calls are being made.
Make sure that the handset is placed
in the charger correctly. You will hear
a confirmation tone.
Check the battery is in the right way,
you will hear a confirmation tone
65