Table of Contents
Advertisement
Diverse 4016 Micro ~ 3rd Edition ~ 12th Octoberr 2001 ~ 3667
Handset does not ring.
You cannot dial external numbers.
Your cannot hear your caller.
The incoming caller's number is
not displayed even though you
have Caller Display.
You cannot hear the ringer or
dialling tone.
You keep hearing the error beep
(a descending tone)
The answering machine
announces "PIN is incorrect"
during remote access.
The answering machine will
not record.
Answering machine messages
do not have the date and time
attached.
66
The ringer may be switched off.
Call barring may be set.
The number you are dialling may
be barred.
The LEFT navigation button has
been pressed and the microphone
is muted.
The caller's number has been
withheld.
You have changed the telephone
line cord on your Diverse base.
You have pressed the wrong
button in a sequence.
The PIN entered is the wrong
one or it is still set to 0000.
The memory is full.
Date/time has not been set.
Hold down the
button to switch
the ringer back on.
Switch off call barring (see page 47).
Check that the number has not been
barred.
Press the
options button to
switch the microphone back on.
Caller has to allow their number to
be sent.
Check that the cord has the correct
3-4 pin assignment of the telephone
leads/EURO CTR37.
Check the prompts in the display
or refer to instructions in the
user guide.
Re-enter the base unit PIN or set
a PIN other than 0000.
Delete old messages. Play back and
delete new messages.
Set the date and time (see page 16).
Advertisement
Table of Contents
