Switchboard Compatibility - BT Diverse 4016 Micro User Manual

Diverse 4016 Micro ~ 3rd Edition ~ 12th Octoberr 2001 ~ 3667
Any other instrument provided by BT
may be assumed to have a REN of 1
unless stated otherwise.
A total REN of 4 is allowed per telephone
line. (For example: if the BT Diverse 4016
is used in conjunction with three
extension telephones, each with a REN
of 1, then the total REN = 4)
Only use approved power supply item
code
M-GA35-095130F
R&TTE
This product is intended for use within
the UK for connection to the public
telephone network and compatible
switchboards.
This equipment complies with the
essential requirements for the Radio
Equipment and Telecommunications
Terminal Equipment Directive
(1999/5/EC).
Helpline
If you are experiencing difficulty,
please call the BT Diverse Helpline
on 08457 908070.

Switchboard compatibility

Generally this telephone may be connected
to switchboards which support tone
signalling and timed break recall. In the
event of any difficulties please consult
your switchboard Service Provider.
.
To set the dialling mode
You need only adjust this
setting if your switchboard
does not operate with the
pre-set tone dialling. You
can change the dial mode
to pulse dialling.
Press the Menu options button.
Menu
Press the DOWN navigation
button until the display shows
Base Settings .
Press the OK options button.
OK
Press the DOWN navigation
button until display shows
Add. Features .
Press the OK options button.
OK
The display shows
Dialling Mode .
Press the OK options button.
OK
Press the UP or DOWN
navigation button to select:
– Tone (with TBR)
– Pulse (with Earth Recall)
– DTMF - Earth (tone with
Earth loop recall)
Press the OK options button
OK
to confirm the setting.
The display shows
Entry Saved .
Press the RED PHONE button
until you reach the idle display.
69