BT Diverse 4016 Micro User Manual page 72

Diverse 4016 Micro ~ 3rd Edition ~ 12th Octoberr 2001 ~ 3667
To set the recall time
You need only adjust this setting
if your switchboard requires a
different recall time to the
pre-set recall time of 100ms
which is standard for the UK.
Press the Menu options button.
Menu
Press the DOWN navigation
button until the display shows
Base Settings .
Press the OK options button.
OK
Press the DOWN navigation
button until the display shows
Add. Features .
Press the OK options button.
OK
Press the DOWN navigation
button until the display shows
TBR .
Press the OK options button.
OK
Press the UP or DOWN
navigation button to select the
flash time you want. Options
are 80ms , 100ms , 120ms , 180ms ,
250ms , 300ms or 600ms .
Press the OK options button to
OK
confirm. The display shows
Entry saved .
Press the RED PHONE button
until you reach the idle display.
70
Note
100ms is the standard setting for most
UK switchboards.
To switch temporarily to
tone dialling
If you are using pulse dialling
with your switchboard but
need tone dialling to use
certain functions on your
Diverse 4016 Micro, you can
switch to tone dialling during
the call.
During your call:
Press the Menu options button.
Menu
Press the DOWN navigation
button until the display shows
Temp.Tone .
Press the OK options button.
OK
Tone dialling is set for the
duration of the call.
Press the RED PHONE button
until you reach the idle display.
Note
This setting is only for the duration of
the call.